(2022) PASS NSE7_SDW-6.4 exam with Fortinet NSE7_SDW-6.4 Real Exam Questions
Real exam questions are provided for NSE 7 Network Security Architect tests, which can make sure you 100% pass
NEW QUESTION 22
What would best describe the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Interface-based shaping mode
- B. Per-IP shaping mode
- C. Reverse policy shaping mode
- D. Shared policy shaping mode
Answer: D
NEW QUESTION 23
Refer to the exhibit
Which statement about the ADVPN device role in handling traffic is true?
- A. This is a spoke that has received a query from a remote hub and has forwarded the response to its hub
- B. Two spokes 100.64.3.1 and 10.1.2. 254 forward their queries to their hubs
- C. Two hubs. 10.1.1.254 and 10.1.2.254, are receiving and forwarding queries between each other
- D. This is a hub that has received a query from a spoke and has forwarded it to another spoke
Answer: D
NEW QUESTION 24
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two )
- A. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager
- B. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager
- C. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices
- D. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
Answer: A,D
NEW QUESTION 25
Which statement reflects how BGP tags work with SD-WAN rules?
- A. Route tags are used for a BGP community and the SD-WAN rules are assigned the same tag
- B. VPN topologies are formed using only BGP dynamic routing with SD-WAN
- C. BGP tags match the SD-WAN rule based on the order that these rules were installed.
- D. BGP tags require that the adding of static routes be enabled on all ADVPN interfaces
Answer: B
NEW QUESTION 26
Refer to the exhibit.
Which statement about the trace evaluation by FomGate is true?
- A. The packet exceeded the configured maximum bandwidth and was dropped by the shared shaper.
- B. The packet exceeded the configured bandwidth and was dropped based on the priority configuration
- C. Packets exceeding the configured concurrent connection limit are dropped based on tfte priority configuration.
- D. Packets exceeding the configured maximum concurrent connection limit are denied by the per-IP shaper.
Answer: C
NEW QUESTION 27
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SO-WAN interface and the static routes configuration.
Port1 and port2 are member interfaces of the SD-WAN, and port2 becomes a dead member after reaching the failure thresholds Which statement about the dead member is correct?
- A. Subnets 100 .64.1.0/23 and 172 . 20 . 0. 0/16 are reachable only through port1
- B. Dead members require manual administrator access to bring them back alive
- C. SD-WAN interface becomes disabled and port1 becomes the WAN interface
- D. Port2 might become alive when a single response is received from an SLA server
Answer: A
NEW QUESTION 28
What are the two minimum configuration requirements for an outgoing interface to be selected once the SD-WAN logical interface is enabled? (Choose two )
- A. Specify outgoing interface routing cost.
- B. Configure SD-WAN rules interface preference.
- C. Select SD-WAN balancing strategy.
- D. Specify incoming interfaces in SD-WAN rules.
Answer: A,B
NEW QUESTION 29
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the traffic shaping policy and exhibit B show: the firewall policy FortiGate is not performing traffic shaping as expected basi on the policies shown in the exhibits.
To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?
- A. The web filter profile must be enabled on the firewall policy
- B. The application control profile must be enabled on the firewall policy.
- C. The shaper mode must be applied per-IP shaper on the traffic shaping policy
- D. The URL category must be specified on the traffic shaping policy
Answer: A
NEW QUESTION 30
Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?
- A. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.
- B. The 10 Mbps bandwidth is shared equally among the IP addresses.
- C. A single user uses the allocated bandwidth divided by total number of users.
- D. Each IP is guaranteed a minimum 10 Mbps of bandwidth
Answer: A
NEW QUESTION 31
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the traffic shaping policy and exhibit B show: the firewall policy FortiGate is not performing traffic shaping as expected basi on the policies shown in the exhibits.
To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?
- A. The web filter profile must be enabled on the firewall policy
- B. The application control profile must be enabled on the firewall policy.
- C. The shaper mode must be applied per-IP shaper on the traffic shaping policy
- D. The URL category must be specified on the traffic shaping policy
Answer: A
NEW QUESTION 32
Refer to the exhibit.
Based on output shown in the exhibit, which two commands can be used by SD-WAN rules? (Choose two.)
- A. set priority 10.
- B. set load-balance-mode source-ip-based.
- C. set cost 15.
- D. set source 100.64.1.1.
Answer: A,B
NEW QUESTION 33
Which components make up the secure SD-WAN solution?
- A. Telephone, ISDN, and telecom network.
- B. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
- C. Datacenter, branch offices, and public cloud
- D. Application, antivirus, and URL, and SSL inspection
Answer: D
NEW QUESTION 34
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set source 100.64.1.1.
- B. Set cost 15.
- C. Set priority 10.
- D. Set load-balance-mode source-ip-ip-based.
Answer: B,C
NEW QUESTION 35
Refer to the exhibit
Based on the exhibit, which two statements about existing sessions on FortiGate after a firewall policy change, are true?(Choose two.)
- A. The old sessions terminate after a policy change
- B. Existing sessions remain unchanged after a policy change
- C. FortiGate re-evaluates new packets after a policy change
- D. All sessions are flushed by FortiGate after a policy change
Answer: B,C
NEW QUESTION 36
Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?
- A. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.
- B. The 10 Mbps bandwidth is shared equally among the IP addresses.
- C. A single user uses the allocated bandwidth divided by total number of users.
- D. Each IP is guaranteed a minimum 10 Mbps of bandwidth
Answer: A
Explanation:
Reference:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/885253/per-ip-traffic-shaper
NEW QUESTION 37
What is the lnkmtd process responsible for?
- A. Logging interface quality information
- B. Flushing route tags addresses
- C. Monitoring links for any bandwidth saturation
- D. Processing performance SLA probes
Answer: C
NEW QUESTION 38
Refer to exhibits.
Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic; however, inbound traffic is not being evaluated by the shaping policy.
Based on the exhibits, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic?
- A. The guaranteed-10mbps option must be selected as the reverse shaper option.
- B. The guaranteed-10mbps option must be selected as the per-IP shaper option
- C. The reverse shaper option must be enabled and a traffic shaper must be selected
- D. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
Answer: A
NEW QUESTION 39
Refer to the exhibit.
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
- A. FortiGate has terminated the session after a change on policy ID 1.
- B. Firewall policy ID 1 has source NAT disabled.
- C. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
- D. Changes have been made on firewall policy ID 1 on FortiGate.
Answer: D
NEW QUESTION 40
Refer to the exhibit.
Which two statements about the status of the VPN tunnel are true? <Choose two )
- A. 100.64.3.1 is one of the remote IP address that comes through index interface 1.
- B. FortiGate created a single IPsec virtual interface that is shared by all clients.
- C. There are separate virtual interfaces for each dial-up client.
- D. VPN static routes are prevented from populating the FortiGate routing table.
Answer: A,B
NEW QUESTION 41
Which two statements reflect the benefits of implementing the ADVPN solution to replace conventional VPN topologies? (Choose two )
- A. It dynamically assigns cost and weight between the hub and the spokes, based on the physical distance
- B. It ensures that spoke-to-spoke traffic no longer needs to flow through the tunnels through the hub
- C. It creates redundant tunnels between hub-and-spokes, in case failure takes place on the primary links
- D. It provides direct connectivity between all sites by creating on-demand tunnels between spokes.
Answer: B,C
NEW QUESTION 42
Refer to the exhibit.
Based on the exhibit, which two statements about traffic passing through the SD WAN member port2 are true? (Choose two)
- A. FortiGate flushes all routing information from the session table after a route change
- B. FortiGate performs new routing lookups for new packets after a route change
- C. FortiGate marks an existing session routing information as persistent
- D. FortiGate, by default, resets all session routing information after a route change
Answer: B,C
NEW QUESTION 43
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.
Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)
- A. The initial session of an application goes through a learning phase in order to apply the correct rule
- B. The implicit rule overrides all other rules because parameters widely cover sources and destinations.
- C. The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces
- D. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom
Answer: A,B
NEW QUESTION 44
Refer to exhibits
Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate Based on the FortiGate configuration shown in the exhibits, what are two issues you might encounter when creating an SD-WAN interface on port1 and port2? {Choose two )
- A. Member interface that have IP address of 0.0.0.0/0.0.0.0
- B. Member interfaces that are physical interfaces as well as VLAN aggregate, and iPsec interfaces
- C. Member interfaces that are referenced by any other configuration element
- D. Member interfaces that are administratively down
Answer: C,D
NEW QUESTION 45
Refer to exhibits.
Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.
Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)
- A. The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces.
- B. The initial session of an application goes through a learning phase in order to apply the correct rule.
- C. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom.
- D. The implicit rule overrides all other rules because parameters widely cover sources and destinations.
Answer: C,D
NEW QUESTION 46
......
Fortinet NSE7_SDW-6.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Latest NSE7_SDW-6.4 Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.itpassleader.com/Fortinet/NSE7_SDW-6.4-dumps-pass-exam.html
NSE7_SDW-6.4 Exam with Guarantee Updated 54 Questions: https://drive.google.com/open?id=1-777UkZRwPX6o1b6DJCypCISKFyL1NOk