[2026] Easy To Download EDI101 Actual Exam Dumps Resources
Uplift Your EDI101 Exam Marks With The Help of EDI101 Dumps
NEW QUESTION # 13
After opening a message in the messages activity, you find that you are unable to retrigger the message. What are some reasons that this might be the case? (SELECT ALL THAT APPLY)
- A. The message was already sent
- B. The message was on an incoming interface
- C. The message was previously retriggered
- D. The message was previously resubmitted
Answer: B,C
Explanation:
Retriggering is the process of asking Epic to re-create an outgoing message based on current data. You cannot retrigger an incoming message because retriggering is an outgoing function (the equivalent for incoming is " resubmit " ). Furthermore, Bridges prevents " recursive " retriggering-you cannot retrigger a message that was itself created by a retriggering action (Option A) to prevent duplicate processing loops.
NEW QUESTION # 14
Assuming that your message starts with MSH|, which of the following strings would you need to escape a portion of? (SELECT ALL THAT APPLY)
- A. they took ~10mg of this medication
- B. patient & their mother arrived at the ED
- C. this procedure will be performed @ EMC family Medicine
- D. copay: $10.00
Answer: A,B
Explanation:
HL7 uses specific characters as delimiters to separate data. Based on a standard MSH segment (MSH|^~ & ), the characters & (subcomponent separator) and ~ (repetition separator) are special characters. If these characters appear as part of the actual data text, they must be " escaped " using the escape character (usually \) so the interface parser doesn ' t mistake them for structural separators.
NEW QUESTION # 15
Which queue contains a list of messages waiting for a patient lock?
- A. Data Queue
- B. Holding Queue
- C. Control Queue
- D. Event Queue
Answer: B
Explanation:
If an incoming message arrives for a patient whose record is currently being edited by a user in Hyperspace, the record is " locked. " Bridges cannot file to a locked record, so it places the message in the Holding Queue
. Once the user finishes their work and the lock is released, the message is moved back to the Data Queue to be filed.
NEW QUESTION # 16
For incoming interfaces using Interconnect, which process puts the message on the data queue?
- A. Event Daemon
- B. Interconnect
- C. Filer Daemon
- D. Communications Daemon
Answer: B
Explanation:
When an interface uses Interconnect (Epic ' s HTTPS-based framework) for incoming data, Interconnect receives the message directly via a web service call. Because it is an HTTPS connection rather than a standard TCP/IP socket, Interconnect handles the initial receipt and places the message directly onto the Bridges Data Queue for the Filer Daemon to process.
NEW QUESTION # 17
Consider a new Epic master file ZAI, which holds records representing the intelligent robots working in a futuristic hospital. Each ZAI record has an item defining the type of robot. While the ZAI master file typically has thousands of robot records, there are only a dozen robot types. Which mapping method would be used to send ZAI record-level identifiers?
- A. HL7 Processing ID
- B. Message Structure Override
- C. Identity
- D. Translation Tables
Answer: C
Explanation:
Even in a fictional scenario, the rule remains: if you are mapping record-level identifiers (the unique ID for each individual robot record), you must use Identity . Translation Tables would only be appropriate for the " robot types " (since there are only a dozen), but for the thousands of individual robot records themselves, Identity provides the necessary cross-referencing between Epic and external systems.
NEW QUESTION # 18
In which activity can you re-evaluate errors for workqueues?
- A. Workqueue List
- B. Interface Error Workqueue Maintenance
- C. Error Log Report
- D. Message Search
Answer: B
Explanation:
If workqueue rules are updated or if errors need to be reassessed against existing rules, the Interface Error Workqueue Maintenance activity is used. This utility allows the system to sweep through existing errors and re-apply logic to ensure they are appearing in (or have been removed from) the correct workqueues.
NEW QUESTION # 19
Which documents can be shared with other software vendors interested in integrating with Epic interfaces?
- A. Interface Reference Guides in Hyperspace
- B. EDI101 Training Companion
- C. Technical Specifications on open.epic.com
- D. Interface Reference Guides in Galaxy
Answer: C
Explanation:
Epic maintains a public-facing portal (open.epic.com) specifically for third-party vendors and developers.
While Interface Reference Guides (IRGs) in Hyperspace or Galaxy contain proprietary information intended for Epic customers, the Technical Specifications on open.epic.com are designed to be shared to facilitate interoperability and standards-based integration.
NEW QUESTION # 20
An ID Type can be reused for multiple Chronicles master files.
- A. True
- B. False
Answer: B
Explanation:
In Epic's Identity framework, an ID Type is explicitly linked to a single Chronicles master file (e.g., EPT for patients, SER for providers). This one-to-one relationship ensures that the system knows exactly which master file to search when an ID of that type is received in a message. You cannot use a single ID Type definition to identify both a patient and a provider.
NEW QUESTION # 21
A new error started logging to your interface and your team decides that this error should be worked on an existing workqueue. You properly update the workqueue rule to include the new error. Which of the following will your workqueue contain moving forward if you take no other actions? (SELECT ALL THAT APPLY)
- A. All occurrences of the new error, past and future
- B. Future occurrences of the new error, and none of the previous occurrences
- C. No occurrences of the new error
- D. All errors previously added to the workqueue
Answer: B,D
NEW QUESTION # 22
You can look for messages across multiple interfaces in a single search.
- A. True
- B. False
Answer: A
Explanation:
The Message Search activity in Bridges is designed for flexibility. One of its core features is the ability to select multiple interface specifications or even all interfaces within a search. This allows an analyst to track a patient's data across different systems (e.g., searching for both Lab and Pharmacy messages simultaneously) in a single consolidated result list.
NEW QUESTION # 23
Which of the following are options in the Criteria tab of the Error Log Report? (SELECT ALL THAT APPLY)
- A. Report on errors with the severity of failure
- B. Report on specific error codes
- C. Report on errors with severity overrides
- D. Report on errors for a given message number
Answer: A,B,D
Explanation:
The Criteria tab allows for precise filtering of logs. Analysts can search for errors associated with a specific message (Option B), filter for specific error codes to investigate a known issue (Option C), or isolate critical issues by filtering for a severity of " Failure " (Option D). Severity overrides (Option A) are a configuration setting rather than a standard search filter for the log report itself.
NEW QUESTION # 24
Which interfaces can perform Patient Validation? (Select the most complete answer)
- A. All incoming patient-based interfaces
- B. All outgoing patient-based interfaces
- C. Incoming results interfaces
- D. Only incoming interfaces that can create patients
Answer: A
Explanation:
Patient Validation is a protective step taken during the filing process for all incoming patient-based interfaces . Whether the interface is handling admissions (ADT), clinical results (ORU), or pharmacy orders (RDE), the system must verify that the patient identified by the ID matches the demographic data in the message before any data is written to Chronicles.
NEW QUESTION # 25
How can incoming interfaces determine the ID type to use when looking up a record? (SELECT ALL THAT APPLY)
- A. Match the ID type identifiers from the message to the External System Settings section of the ID Type configuration
- B. Find any record with the received ID and choose an associated ID type
- C. Use a default ID type specified on the interface
- D. Incoming interfaces do not need to lookup an ID type
Answer: A,C
Explanation:
Incoming interfaces must identify the correct ID Type to successfully locate a record in Chronicles. They do this in two primary ways:
* Default ID Type: The interface can be configured with a fallback ID type to use if no other information is provided.
* External System Settings: The interface can look at identifiers within the HL7 message (like the Assigning Authority in PID-3.4) and match them against the " External System Settings " defined in the ID Type configuration . Option C is incorrect because searching without a defined ID type would be inefficient and could lead to incorrect record matches.
NEW QUESTION # 26
It is possible to start the Communications Daemons for both incoming and outgoing interfaces at the same time.
- A. True
- B. False
Answer: A
Explanation:
Bridges management tools allow administrators to select multiple interfaces-regardless of whether they are sending data (outgoing) or receiving data (incoming)-and issue a " Start " command to their respective Communications Daemons simultaneously. This facilitates efficient management during system startups or after maintenance.
NEW QUESTION # 27
When applying a filter on a related record in the message companion, you notice that a message for a particular patient is not showing up in your results. Which of the following could be a reason for this behavior?
- A. The message companion only works for outgoing messages.
- B. The message was retriggered from another message.
- C. You must specify " contains " instead of " equals " in your message search criteria.
- D. The patient is not linked to the message due to a failure error in message processing.
Answer: D
Explanation:
The Message Companion relies on a successful link between a message and a specific record (like a Patient or Encounter). If a message encounters a failure error during processing (e.g., a critical identification error), Bridges may be unable to definitively link that message to the patient record in Chronicles. Because the link is missing, the message will not appear in tools like the Message Companion that filter specifically by that patient ' s ID.
NEW QUESTION # 28
Which of the following messages cannot be retriggered? (SELECT ALL THAT APPLY)
- A. Messages loaded from a flat file
- B. Incoming messages
- C. Messages resubmitted from other messages
- D. Messages retriggered from other messages
Answer: B,D
Explanation:
Retriggering is specifically an outgoing interface action. Therefore, Incoming messages (Option D) cannot be retriggered. Additionally, to maintain a clear audit trail and prevent logic errors, Bridges does not allow you to retrigger a message that was already the result of a retrigger (Option A).
NEW QUESTION # 29
Which of the following are possible reasons that an incoming message might show as " waiting " in your message search results? (SELECT ALL THAT APPLY)
- A. There is a high volume of messages to file.
- B. The message is in the holding queue.
- C. The communications daemon is not running.
- D. The Filer Daemon is not running.
Answer: A,B,D
Explanation:
A message shows as " waiting " when it has been received but not yet processed by the Filer. Common causes include:
* High Volume: The Filer Daemon is working through a backlog.
* Filer Daemon Stopped: If the Filer is not running, no messages can move from the queue to the database.
* Holding Queue: The message is specifically waiting for a patient record lock to be released before it can file.
* The Communications Daemon (Option D) is responsible for receiving the message; if it weren ' t running, the message wouldn ' t even be in the search results yet.
NEW QUESTION # 30
Which of the following refers to specifically the 2nd component in the 5th field of PID?
- A. PID-5^2
- B. PID-5[2]
- C. PID52
- D. PID-5.2
Answer: D
Explanation:
In HL7 v2 messaging, a standard naming convention is used to identify specific data locations. The format follows Segment-Field.Component.Subcomponent. For example, PID-5 represents the Patient Name field. To specify a component within that field (like the Given Name, which is the 2nd component), a dot is used as a separator. Therefore, PID-5.2 correctly identifies the 2nd component of the 5th field.
NEW QUESTION # 31
How can you reuse error steps you ' ve already created with additional error code/interface ID combinations?
- A. Use the sync manager to link steps together for multiple error codes
- B. Run the Error Steps Copy Utility in Bridges Text
- C. Use the Copy Steps button from an Error Workqueue
- D. Error steps cannot be reused across multiple error codes
Answer: B
Explanation:
To efficiently manage investigation documentation, Epic provides the Error Steps Copy Utility within the Bridges Text-based menus. This utility allows administrators to take a set of resolution steps defined for one error/interface and copy them to others, preventing the need for manual duplicate entry.
NEW QUESTION # 32
The Interface Specification Audit Report will show changes to which of the following items?
- A. Message Volume
- B. Profile Variables
- C. Port and IP Address
- D. Interface Alerts
Answer: B,C
Explanation:
The Specification Audit Report is designed to track configuration changes-the " build " of the interface. It records modifications to critical connectivity settings like the Port and IP Address (Option C) and functional logic changes in Profile Variables (Option D). Operational data like Message Volume (Option A) or active Interface Alerts (Option B) are monitored in real-time activities and are not part of the static specification audit.
NEW QUESTION # 33
The Background Monitor Definition activity allows you to configure an interface to automatically restart after a system downtime, contingent on the status of a different interface.
- A. True
- B. False
Answer: A
Explanation:
The Background Monitor Definition in Bridges is used to manage interface health and automation. It allows administrators to set up dependencies, meaning an interface can be configured to start or restart only if a specific prerequisite interface is already running. This is particularly useful for ensuring that foundational interfaces (like those handling patient identity) are active before clinical data interfaces begin processing.
NEW QUESTION # 34
......
Use EPIC EDI101 Dumps To Succeed Instantly in EDI101 Exam: https://www.itpassleader.com/EPIC/EDI101-dumps-pass-exam.html
Ultimate Guide to EDI101 Dumps - Enhance Your Future Career Now: https://drive.google.com/open?id=1c-gOOWx-WInMyQvT5M8vjJa0iunID2pY