350-501 PDF Pass Leader, 350-501 Latest Real Test
Valid 350-501 Test Answers & 350-501 Exam PDF
Cisco 350-501 certification exam is a prerequisite for the Cisco Certified Specialist - Service Provider Core certification. Implementing and Operating Cisco Service Provider Network Core Technologies certification is intended for network engineers, network architects, and network administrators who work in service provider organizations. Implementing and Operating Cisco Service Provider Network Core Technologies certification is also suitable for professionals who want to enhance their skills in service provider network technologies and advance their careers.
Assurance and Automation: 15%
- Configuring the dial-in/out telemetry streams with the usage of gRPC.
- Designing and verifying IPFIX/NetFlow, SNMP, RESTCONF, and NETCONF;
- Explaining programmable APIs utilized to add Cisco devices in the network automation;
- Defining the external script to configure Cisco devices with the usage of REST API;
- Describing model-driven telemetry as well as data analytics in the service provider;
- Describing the high-level principles and advantages of the data modeling language;
NEW QUESTION # 92
What are two factors to consider when implementing NSR High Availability on an MPLS PE router? (Choose two.)
- A. It requires routing protocol extensions
- B. It requires all PE-CE sessions to support NSR
- C. It consumes more memory and CPU resources than NSF
- D. It operates normally without NSR support on the PE peers
- E. It cannot sync state information across redundant RPs
Answer: C,D
Explanation:
Section: Networking
NEW QUESTION # 93
Which statement about segment routing prefix segments is true?
- A. It is the longest path to a node
- B. It is linked to a prefix SID that is globally unique within segment routing domain
- C. It is linked to an adjacency SID that is globally unique within the router
- D. It requires using EIGRP to operate
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/segment- routing/configuration/guide/b-seg-routing-cg-asr9k/b-seg-routing-cg-asr9k_chapter_010.pdf
NEW QUESTION # 94
Drag and drop the technologies from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 95 
Refer to the exhibit. An engineer needs to implement this QoS policy on customer's network due to ongoing slow network issues. What will be the effect on the network when the engineer implements this configuration?
- A. Traffic that is identified in the ciscopolicy class map will be marked with IP precedence 1 when it enters the pos0/2/0/0 interface
- B. Traffic that is identified in the ciscopolicy class map will be remarked from IP precedence 1 to DSCP AF11 when it exits the pos0/2/0/0 interface
- C. Traffic that is identified in the ciscotest class map will be remarked from IP precedence 1 to DSCP AF11 when it enters the pos0/2/0/0 interface
- D. Traffic that is identified in the ciscotest class map will be marked with IP precedence 1 when it exits the pos0/2/0/0 interface
Answer: D
Explanation:
Section: Networking
NEW QUESTION # 96 
Refer to the exhibit. P3 and PE4 are at the edge of the service provider core and serve as ABR routers.
Aggregation areas are on either side of the core.
Which statement about the architecture is true?
- A. To support seamless MPLS, the BGP route reflector feature must be disabled.
- B. If each area is running its own IGP, the ABR routers must redistribute the IGP routing table into BGP.
- C. If each area is running its own IGP, BGP must provide an end-to-end MPLS LSP.
- D. To support seamless MPLS, TDP must be used as the label protocol.
Answer: C
Explanation:
Section: Architecture
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9600/software/release/16-12/ configuration_guide/mpls/b_1612_mpls_9600_cg/configuring_seamless_mpls.html
NEW QUESTION # 97
Refer to the exhibit.
ASN 64501 currently reaches the networks under the 10.0.0.0/8 prefix via the North_B router, which is a slow backup link. The administrator of ASN 64502 wants traffic from ASN 64501 to 10.0.0.0/8 to travel via the primary link North_A.
Which change to the network configuration accomplishes this task?
- A. Set a lower MED between North_B and South_B
- B. Set a Lower Weight value for incoming traffic on North_A
- C. Advertise the 10.0.0.0/8 prefix through North_B and specific subnets through North_A
- D. Set a higher local preference between North_A and South_A
Answer: A
NEW QUESTION # 98
Refer to the exhibit.
A network engineer with an employee id: 3812:12:993 has started to configure router R1 for IS-IS as shown.
Which additional configuration must be applied to configure the IS-IS instance to advertise only network prefixes associated to passive interfaces?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION # 99 
Refer to the exhibit. An engineer is preparing to implement data plane security configuration.
Which statement about this configuration is true?
- A. Router 2 must configure a route to null 0 for network 192.168.1.0/24 for the RTBH implementation to be complete.
- B. Router 1 must be configured with uRPF for the RTBH implementation to be effective.
- C. Router 1 is the trigger router in a RTBH implementation.
- D. Router 2 is the router receiving the DDoS attack.
Answer: D
Explanation:
Section: Architecture
NEW QUESTION # 100
Refer to the exhibit:
An engineer wants to authenticate the OSPF neighbor between PEA and PE-B using MD5.
Which command on PE-B successfully completes the configuration?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: C
NEW QUESTION # 101
Refer to the exhibit. An engineer implemented this configuration.
What is the status of the neighbor relationship between R1 and R2?
- A. The neighbor relationship is up because R2 is level i and level 2 router.
- B. The neighbor relationship is down because the two routers are in the same subnet.
- C. The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different areas.
- D. The neighbor relationship is down because the two routers are configured with different area types.
Answer: C
NEW QUESTION # 102
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right
Answer:
Explanation:
Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r5-3/mpls/configuration/guide/b-mpls-cg53x-crs/b-mpls-cg53x-crs_chapter_0110.html#con_1279822
NEW QUESTION # 103 
Refer to the exhibit. A network engineer is implementing QoS services. Which two statements about the qos- group keyword on Cisco IOS XR are true? (Choose two.)
- A. QoS group can be used in fabric QoS policy as match criteria.
- B. It cannot be used with priority traffic class.
- C. QoS group marking occurs on the ingress.
- D. The QoS group numbering corresponds to priority level.
- E. It marks packets for end-to-end QoS policy enforcement across the network.
Answer: A,C
Explanation:
Section: Services
NEW QUESTION # 104
Refer to the exhibit.
An engineer is updating this network to meet these conditions:
* Area 10 will receive inter-area routes and support mutual redistribution of external routes with the extranet.
* The ::/0 route is prohibited in Area 10.
* Area 11 will receive only the ::/0 route from the ABR.
* External route redistribution is not supported in Area 11.
* The ABR in Area 11 will advertise no interarea routes.
Which two configurations must be performed to meet the requirements? (Choose two.)
- A. Configure area 10 as nssa on R9 and XR32.
- B. Configure area 11 as nssa default-information-originate on R7 and as nssa on XR31.
- C. Configure area 11 as stub no-summary on R7 and as stub on XR31.
- D. Configure area 11 as nssa no-summary on R7 and as nssa on XR31.
- E. Configure area 10 as stub on R9 and XR32.
Answer: A,C
NEW QUESTION # 105
Which configuration modifies Local Packet Transport Services hardware policies?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: C
NEW QUESTION # 106
Refer to the exhibit:
What is significant about the number 2 in the configuration?
- A. It dictates the number of sessions that can be open with the SNMP manager
- B. It indicates two SNMP managers can read and write with the agent using community string cisco test
- C. It represents the version of SNMP running
- D. It is the numeric name of the ACL that contains the list of SNMP managers with access to the agent
Answer: D
NEW QUESTION # 107
......
350-501 Dumps Ensure Your Passing: https://www.itpassleader.com/Cisco/350-501-dumps-pass-exam.html
350-501 exam dumps and online Test Engine: https://drive.google.com/open?id=13bu6X0d63tXsCYLwvXgfx7X5qr-Z3U5P