[Apr 28, 2024] Verified C1000-132 dumps and 66 unique questions
C1000-132 Dumps for Pass Guaranteed - Pass C1000-132 Exam 2024
IBM C1000-132 certification is an essential credential for professionals who are working with IBM Maximo Manage v8.0. IBM Maximo Manage v8.0 Implementation certification not only validates the skills and knowledge of a candidate but also demonstrates their commitment to continuous learning and professional development. The IBM C1000-132 certification can help professionals to boost their career prospects and increase their earning potential in the asset management industry.
NEW QUESTION # 31
In which three applications can Asset Depreciation be configured?
- A. Assets
- B. Asset Templates
- C. Tools
- D. Locations
- E. Item Master
- F. Chart of Accounts
Answer: A,B,D
Explanation:
Asset Depreciation can be configured in three applications in IBM Maximo Manage v8.0 according to IBM's documentation. These applications are:
Asset Templates
Assets
Locations
NEW QUESTION # 32
Which two automation script launch points can be triggered directly by a workflow?
- A. Attribute - '
- B. Object
- C. Custom Condition
- D. Integration
- E. Action
Answer: C,E
Explanation:
two automation script launch points that can be triggered directly by a workflow are B. Custom Condition and D. Action. An action launch point associates a script with an action and executes when the specified action occurs1. A custom condition launch point associates a script with a condition and executes when the specified condition is evaluated2.
NEW QUESTION # 33
In the Budget Monitoring application, where are the budget amounts entered?
- A. Focal Point
- B. Budget Line
- C. Budget Rules
- D. Budget Record
Answer: B
Explanation:
the budget amounts in the Budget Monitoring application are entered at the Budget Line level. A Budget Line represents a specific account or category within a budget and allows for detailed tracking and analysis of budget data.
NEW QUESTION # 34
How many failure reports can be created for the same Work Order?
- A. just one failure report
- B. unlimited failure reports for either a work order or any of its tasks
- C. one failure report for the work order and only one for each task of the work order
- D. unlimited failure reports for each work order, but none for a task
Answer: C
Explanation:
In IBM Maximo Manage, you can create one failure report for a Work Order and only one for each task of the Work Order.
NEW QUESTION # 35
What are three integration End Points Handlers available in Maximo Manage?
- A. XLS
- B. XMLFILE
- C. WSDL
- D. EMAIL
- E. KAFKA
- F. FLATFILE
Answer: B,D,F
Explanation:
Three integration End Points Handlers available in Maximo Manage are XMLFILE, EMAIL and FLATFILE.
NEW QUESTION # 36
What are the three default values used with the position of a Crew Type or Crew?
- A. Leader
- B. Apprentice
- C. Supervisor
- D. Technician
- E. Helper
- F. Driver
Answer: A,B,E
Explanation:
In IBM Maximo Manage v8.0 implementation, the three default values used with the position of a Crew Type or Crew are Helper, Leader, and Apprentice. These values represent the different roles that members of a crew can assume.
NEW QUESTION # 37
In what Maximo Manage application are the specifications of an asset for calibration entered?
- A. Asset
- B. Data Sheet Template
- C. Classifications
- D. Improvements
Answer: B
Explanation:
In IBM Maximo Manage, the specifications of an asset for calibration are entered in the Data Sheet Template application.
NEW QUESTION # 38
When users are added to multiple security groups, the authorization privileges of the security groups combine, with the exception of security groups with which setting?
- A. Independent
- B. Separate
- C. Discreet
- D. Autonomous
Answer: A
Explanation:
When users are added to multiple security groups, the authorization privileges of the security groups combine, with the exception of security groups with the "Independent" setting. When a security group has the "Independent" setting, its authorization privileges are applied separately from any other security group that the user belongs to.
NEW QUESTION # 39
In the Purchase Requisitions application and with default settings, what status does the Purchase Requisition change to when all of its lines have been copied to a Purchase Order or a Contract?
- A. APPR
- B. INPRG
- C. CLOSE
- D. COMPLETE
Answer: D
Explanation:
In the Purchase Requisitions application with default settings in IBM Maximo Manage, when all lines of a Purchase Requisition have been copied to a Purchase Order or a Contract, the status of the Purchase Requisition changes to COMPLETE.
NEW QUESTION # 40
When a Service Level Agreement is applied to a WORKORDER object, what Commitment Type will be missing from the lookup?
- A. DELIVERY
- B. DOWNTIME
- C. CONTACT
- D. AVAILABILITY
Answer: A
Explanation:
When a Service Level Agreement (SLA) is applied to a WORKORDER object in IBM Maximo Manage v8.0 implementation, the Commitment Type that will be missing from the lookup is DELIVERY. The other possible Commitment Types in Maximo Manage are DOWNTIME, AVAILABILITY, and CONTACT.
NEW QUESTION # 41
Which two records can be included as a contract line item on a Lease/Rental Contract?
- A. Asset
- B. Non-Rotating Asset
- C. Tool
- D. Non-Rotating item
- E. Rotating item
Answer: A,E
Explanation:
In IBM Maximo Manage, two records that can be included as a contract line item on a Lease/Rental Contract are a Rotating item and an Asset.
NEW QUESTION # 42
What can be done when decommissioning a location that cannot be done when decommissioning an asset?
- A. Roll New Status down to All Assets in All Changed Locations?
- B. Delete Associated Service Addresses That will be made Redundant?
- C. Remove All References to This Location from All Job Plans?
- D. Remove All Reference to This Location from All Contracts?
Answer: A
Explanation:
When decommissioning a location in IBM Maximo Manage, you can roll the new status down to all assets in all changed locations. This cannot be done when decommissioning an asset.
NEW QUESTION # 43
In the Inventory Usage application when the type is TRANSFER, if a user changes the status to COMPLETE what type of transaction record is created?
- A. Transaction Type ISSUE in MATUSETRANS table
- B. Transaction Type SHIPTRANSFER in MATRECTRANS table
- C. Transaction Type RETURN in MATUSETRANS table
- D. Transaction Type TRANSFER in MATRECTRANS table
Answer: B
Explanation:
In the Inventory Usage application when the type is TRANSFER, if a user changes the status to COMPLETE a transaction record of type SHIPTRANSFER is created in the MATRECTRANS table.
NEW QUESTION # 44
In the Meters application what are the three meter types?
- A. FEATURES
- B. CONSTANT
- C. CHARACTERISTIC
- D. CONTINUOUS
- E. CALIBRATION
- F. GAUGE
Answer: C,D,F
Explanation:
In the Meters application, the three meter types are GAUGE, CHARACTERISTIC, and CONTINUOUS. GAUGE meters measure a discrete value or range of values, such as the oil pressure in an engine. CHARACTERISTIC meters measure a specific attribute of an asset, such as the temperature of an engine. CONTINUOUS meters track usage or consumption over time, such as the number of hours an asset has been in operation.
NEW QUESTION # 45
What are three available associations in the Hazards application?
- A. Safety Plans
- B. Tag Outs
- C. Hazardous Materials
- D. Precautions
- E. Material Safety Data Sheets (MSDS)
- F. Lock Outs
Answer: C,D,E
Explanation:
The Hazards application in IBM Maximo Manage v8.0 allows users to associate Material Safety Data Sheets (MSDS), Hazardous Materials, and Precautions with a particular hazard. These associations help in managing safety information related to hazards and in ensuring compliance with safety regulations.
NEW QUESTION # 46
In the Organizations application, which action is used to create Inventory Usage documents for new reservations?
- A. Work Order Options
- B. Reservation Options
- C. Inventory Options
- D. Inventory Usage Options
Answer: B
Explanation:
In the Organizations application in IBM Maximo Manage, you should use Reservation Options to create Inventory Usage documents for new reservations.
NEW QUESTION # 47
Which limit is used to trigger a Condition Monitoring Point with a GAUGE Meter Type?
- A. Measurement Limit
- B. Warning Limit
- C. Meter Limit
- D. Action Limit -
Answer: D
Explanation:
In IBM Maximo Manage, the Action Limit is used to trigger a Condition Monitoring Point with a GAUGE Meter Type.
NEW QUESTION # 48
What information can be updated in the Master PM application for an associated Preventive Maintenance record (PM)?
- A. PM Hierarchy
- B. Work Order Status
- C. Generate Work Orders
- D. PM Forecast
Answer: D
Explanation:
The PM Forecast field on the Master PM record is used to specify how many days ahead you want to forecast work orders for associated PMs2. This field can be updated in the Master PM application and affects how many work orders are generated from the associated PMs.
NEW QUESTION # 49
Which Maximo application can be used to generate replacement plans for assets?
- A. Maximo Predict
- B. Maximo Manage
- C. Maximo Health, Safety and Environmental (HSE)
- D. Maximo Health
Answer: D
Explanation:
The Maximo Health application can be used to generate replacement plans for assets.
NEW QUESTION # 50
When creating a new Inspection form, a client requires a Work Order to be created if certain responses are recorded. Which two actions are required for this to be achieved?
- A. Make the question response interactive.
- B. Choose Work Order on question action.
- C. Create an escalation on the QRESPONSE Object.
- D. In Form Settings add an Action Script.
- E. In the Question Options, set the Require action flag.
Answer: B,E
Explanation:
According to the IBM documentation, you can create inspection forms that detail the questions and types of responses that you want to collect. The inspection forms that you create are then available to inspectors in the Conduct an Inspection tool. You can also add conditions to the response fields of existing questions on inspection forms to gather more information. You can determine which additional response fields appear to inspectors, depending on the answers they gave to inspection form questions.
To create a work order based on certain responses, you need to do two things:
Choose Work Order on question action: This option allows you to specify an action that is triggered when a certain response is selected by the inspector. For example, if a question asks "Is there any damage?", and the inspector selects "Yes", you can choose Work Order as the action that is triggered by this response. This will create a work order for repairing the damage.
In the Question Options, set the Require action flag: This option allows you to indicate that an action is required for a question. For example, if a question asks "Is there any damage?", and you set the Require action flag to Yes, then the inspector must select a response that triggers an action, such as Work Order or Notification. If they select a response that does not trigger an action, such as "No" or "N/A", they will see an error message and will not be able to submit the inspection form.
NEW QUESTION # 51
In which application can a Contract property default be set for a specific contract type, for example Is early termination allowed by the Customer?
- A. Organizations
- B. Database Configuration
- C. Contract Administration
- D. System Properties
Answer: C
Explanation:
The Contract Administration application is used to set contract property defaults for specific contract types. For example, you can set whether early termination is allowed by the customer for a specific contract type.
NEW QUESTION # 52
A user wishes to perform the same work tasks on several assets simultaneously. How can this be configured?
- A. A Work Order Hierarchy should be created against the same Job Plan used for all stops.
- B. A Master Job Plan should be created with Tasks for each Asset.
- C. A Route should be created with each stop being one Asset and the Job Plan associated with the Route record.
- D. The Assets should be specified on the Multiple Assets, Locations and CIs table on the Work Order.
Answer: C
Explanation:
To perform the same work tasks on several assets simultaneously, a route can be created in the Routes application. A route is a series of work orders that are generated in a specific sequence to maintain a group of assets. Each stop in the route can be associated with a specific asset, and the job plan can be assigned to the route record, which means the same job plan tasks can be performed on each asset.
NEW QUESTION # 53
At what database level does a Job Plan exist?
- A. ORG
- B. SYSTEMORGSITE
- C. SYSTEM
- D. SITE
Answer: D
Explanation:
A Job Plan exists at the SITE level in IBM Maximo Manage.
NEW QUESTION # 54
Where in Maximo can the Server IP Addresses and Logged in users be observed?
- A. Maximo Management Interface Work Center
- B. Database Configuration application
- C. Administration Work Center
- D. Server Management Consol
Answer: A
Explanation:
In Maximo Manage, the Server IP Addresses and Logged in users can be observed in the Maximo Management Interface Work Center.
NEW QUESTION # 55
What are the three usage types in the Inventory Usage application?
- A. RECEIV
- B. ISSUE
- C. TRANSFER
- D. MIXED
- E. STAGED
- F. MOVE
Answer: B,C,E
Explanation:
In IBM Maximo Manage v8.0 implementation, the usage types in the Inventory Usage application are ISSUE, STAGED, and TRANSFER. ISSUE is used to relieve items from inventory for use in maintenance or other processes. STAGED is used to reserve items for future use. TRANSFER is used to move items from one inventory location to another, typically within the same organization.
NEW QUESTION # 56
......
IBM C1000-132 exam consists of 67 multiple choice questions and has a time limit of 90 minutes. The passing score for the exam is 62%. C1000-132 exam is available in English and Japanese and can be taken online or in-person at an authorized testing center. Those who pass the exam will receive the IBM Certified Implementation Professional - Maximo Asset Management v8.0 certification, which demonstrates their proficiency in implementing and managing Maximo Asset Management solutions. IBM Maximo Manage v8.0 Implementation certification is recognized globally and can enhance job opportunities and career growth in the IT industry.
The IBM Maximo Manage v8.0 Implementation certification exam helps professionals to validate their skills and knowledge in IBM Maximo Manage solutions. IBM Maximo Manage v8.0 Implementation certification demonstrates that the candidate has the required skills in developing and implementing solutions using IBM Maximo Manage. IBM Maximo Manage v8.0 Implementation certification helps professionals to enhance their career opportunities and provide confidence to their employers that they have the required expertise. The IBM C1000-132 Exam is a valuable certification for professionals who are looking to advance their career in the field of IBM Maximo Manage solutions.
Latest 100% Passing Guarantee - Brilliant C1000-132 Exam Questions PDF: https://www.itpassleader.com/IBM/C1000-132-dumps-pass-exam.html
C1000-132 Exam Dumps - Try Best C1000-132 Exam Questions: https://drive.google.com/open?id=1G1LhroH2Mi7G3pzbqI3fZh1zGBPbloBc