[Dec 29, 2024] Pass Design Track Certification JN0-1103 Exam With 263 Questions
Ultimate Guide to Prepare Free Juniper JN0-1103 Exam Questions and Answer
NEW QUESTION # 63
In a Virtual Chassis Fabric, which two platforms are supported? (Choose two.)
- A. MX Series
- B. EX Series
- C. QFX Series
- D. SRX Series
Answer: B,C
NEW QUESTION # 64
You are working on a campus design for a customer who has acquired a building across the street from the main facility.
The recently acquired building was built in 1979 and has not been updated to support the demands of current network technologies. The building must support high-speed network connections for all users working at the location.
Which two elements would you consider when analyzing connectivity and throughput requirements for this new location? (Choose two.)
- A. the condition of the physical media at the new location
- B. the data received from a traffic analysis
- C. the type of business the customer is in
- D. the hierarchical modules used within each group at the new location
Answer: A,B
NEW QUESTION # 65
Which type of area should you use in an enterprise OSPF deployment if you want to prevent propagation of type 5 LSAs but still allow the redistribution of external routes?
- A. NSSA
- B. backbone
- C. stub
- D. totally stubby
Answer: A
NEW QUESTION # 66
What does the network MTTR measure?
- A. the length of time to build the network
- B. the length of time to repair the network
- C. the length of time it takes to design the network
- D. the length of time it takes to reboot the network devices
Answer: B
NEW QUESTION # 67
Your corporate network is located in a single, multifloor building. Several smaller, remote buildings connect into your main corporate network.
Which topology describes your network?
- A. campus
- B. full mesh
- C. hub-and-spoke
- D. data center
Answer: C
NEW QUESTION # 68
What are the first two steps of business continuity planning? (Choose two.)
- A. test the plan
- B. know your network
- C. formulate the plan
- D. assess the risks
Answer: B,D
NEW QUESTION # 69
In an SRX Series environment, what would you use to manage your network's firewall policy?
- A. Virtual Director
- B. Security Director
- C. Services Activation Director
- D. Network Director
Answer: B
NEW QUESTION # 70
Which statements is true in regards to the Formulate the Plan step of business continuity planning?
- A. You should perform a business impact analysis.
- B. You should perform a risk assessment.
- C. You should list all the functions and services in the network.
- D. You should develop a plan of action to mitigate the risks.
Answer: D
NEW QUESTION # 71
You are asked to evaluate a WAN design for a corporation with a focus on cost, security, and the ability to have direct adjacencies between your remote sites.
Which two solutions would meet these requirements? (Choose two.)
- A. IPsec tunnels over the Internet
- B. GRE tunnels over the Internet
- C. VPLS Layer 2 VPN
- D. MPLS Layer 3 VPN
Answer: A,C
NEW QUESTION # 72
Which statement describes brownfield deployments?
- A. Brownfield deployments use all new equipment.
- B. Brownfield deployments allow for more modular and scalable design than greenfield deployments.
- C. Brownfield deployments are considered more expensive than greenfield deployments.
- D. Brownfield deployments are commonly used and can be restrictive.
Answer: D
NEW QUESTION # 73
Which two elements of customer data would you use to determine the applications that your customer uses most often? (Choose two.)
- A. questionnaires
- B. business goals
- C. interviews
- D. corporate policies
Answer: A,C
NEW QUESTION # 74
A customer has determined the need to upgrade the network so that the packaging and shipping facilities can meet current demand. The customer has voiced concerns that the network design and implementation cannot affect current sales in any way.
What are two ways to address this concern in your network design? (Choose two.)
- A. Collect job aids.
- B. Define security measures.
- C. Analyze packet flow.
- D. Create continuity plans.
Answer: C,D
NEW QUESTION # 75
You are consulting on the redesign for a large retail network. The customer has dozens of locations, all connected to a central data center.
Which two requirements would you expect from you customer? (Choose two.)
- A. resiliency to ensure continuous operation
- B. very high throughput at every location
- C. distributed network management
- D. WAN aggregation using Internet-based VPN
Answer: A,D
NEW QUESTION # 76
Which three options are effective ways of gathering data about the customer's current networking environment? (Choose three.)
- A. job aids
- B. social media
- C. questionnaires
- D. interviews
Answer: A,C,D
NEW QUESTION # 77
Your company's network consists of your headquarters location plus several dozen remote offices.
Remote office users are often unable to access data housed in the headquarters data center due to connectivity issues.
You must update the network to provide reliable access to corporate assets for remote office users.
Which technology is critical to your design project?
- A. WAN acceleration
- B. IPsec
- C. WAN aggregation
- D. QoS
Answer: B
NEW QUESTION # 78
A local university has decided to expand their research capabilities and build a new research facility.
You have been hired to design and install the new network in this building.
The research team expects to generate massive amounts of data, which must be shared with other facilities located on the same campus. Physical access to the building is restricted, and the connection to the other buildings is private and direct.
What is your primary concern in the design of the network?
- A. encryption
- B. security
- C. scalability
- D. resiliency
Answer: B
NEW QUESTION # 79
You must design a campus that involves Ethernet switches that will be using Cat 6 copper cables.
What is the maximum distance between the Ethernet switches?
- A. 1000 feet
- B. 100 feet
- C. 100 meters
- D. 1000 meters
Answer: C
NEW QUESTION # 80
Exhibit:
Referring to the exhibit, which two statements are correct in regards to VRRP? (Choose two.)
- A. You can use VRRP on the SRX devices to WAN connections.
- B. You can use VRRP on the SRX devices for users in Group-A.
- C. You can use VRRP on the SRX devices for users in Group-C.
- D. You can use VRRP on the SRX devices for users in Group-B.
Answer: A,D
NEW QUESTION # 81
Your customers new network contains network devices from multiple vendors. You have been asked to propose two technologies that will work among all the vendors' networking equipment.
Which two technologies can you recommend for the design? (Choose two.)
- A. DTP
- B. DVMRP
- C. PIM
- D. IGMPv2
Answer: C,D
NEW QUESTION # 82
......
Design, Associate (JNCIA-Design) Practice Tests 2024 | Pass JN0-1103 with confidence!: https://drive.google.com/open?id=1-np2_qXJzMutS4c787IltUYIpuU4TJAv
Pass JN0-1103 Tests Engine pdf - All Free Dumps: https://www.itpassleader.com/Juniper/JN0-1103-dumps-pass-exam.html