[Nov 02, 2021] Fully Updated CCNP Enterprise (350-401) Certification Sample Questions
Latest Cisco 350-401 Real Exam Dumps PDF
Career opportunities
With the Cisco CCNP Enterprise certification, the professionals can land some lucrative job roles that will enhance their career growth. Their specific position and salary potential will depend on their years of experience, hands-on skills, and organization, among others. The individuals with this certificate can take up the following titles: a Network Engineer, a Security Specialist, a Wireless Specialist, and a Networking Specialist. The average salary for these certified experts is about $90,000 and $105,000 per annum.
NEW QUESTION 150
Refer to exhibit.
VLANs 50 and 60 exist on the trunk links between all switches All access ports on SW3 are configured for VLAN 50 and SW1 is the VTP server Which command ensures that SW3 receives frames only from VLAN
50?
- A. SW1 (config)#vtp pruning
- B. SW2(config)#vtp pruning
- C. SW1 (config)#vtp mode transparent
- D. SW3(config)#vtp mode transparent
Answer: A
NEW QUESTION 151
Drag and drop the characteristic from the left onto the orchestration tools that they describe on the right.
Answer:
Explanation:
NEW QUESTION 152
Drag and drop the Qos mechanisms from the left to the correct descriptions on the right
Answer:
Explanation:
Explanation
NEW QUESTION 153
Drag and drop the characteristics from the left onto the correct routing protocol types on the right.
Answer:
Explanation:
Explanation
1,3,6EIGRP,
2,4,5OSPF
NEW QUESTION 154
Refer to the exhibit.
SwitchC connects HR and Sales to the Core switch However, business needs require that no traffic from the Finance VLAN traverse this switch Which command meets this requirement?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: A
NEW QUESTION 155
Refer to the exhibit.
The inside and outside interfaces in the NAT configuration of this device have been correctly identified. What is the effect of this configuration?
- A. NAT64
- B. PAT
- C. dynamic NAT
- D. static NAT
Answer: B
NEW QUESTION 156
Refer to the exhibit.
An engineer must deny Telnet traffic from the loopback interface of router R3 to the loopback interface of router R2 during the weekend hours. All other traffic between the loopback interfaces of routers R3 and R2 must be allowed at all times. Which command accomplish this task?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: D
Explanation:
Explanation
We cannot filter traffic that is originated from the local router (R3 in this case) so we can only configure the ACL on R1 or R2. "Weekend hours" means from Saturday morning through Sunday night so we have to configure: "periodic weekend 00:00 to 23:59".
Note: The time is specified in 24-hour time (hh:mm), where the hours range from 0 to 23 and the minutes range from 0 to 59.
NEW QUESTION 157
Which three methods does Cisco DNA Centre use to discover devices? (Choose three)
- A. a specified range of IP addresses
- B. ping
- C. LLDP
- D. SNMP
- E. NETCONF
- F. CDP
Answer: A,C,F
Explanation:
Explanation
NEW QUESTION 158
What does the number in an NTP stratum level represent?
- A. The number of hops it takes to reach the authoritative time source.
- B. The amount of offset between the device clock and true time.
- C. The number of hops it takes to reach the master time server.
- D. The amount of drift between the device clock and true time.
Answer: A
Explanation:
Explanation
NTP uses the concept of a stratum to describe how many hops (routers) away a machine is from an authoritative time source, usually a reference clock. A reference clock is a stratum 0 device that is assumed to be accurate and has little or no delay associated with it. Stratum 0 servers cannot be used on the network but they are directly connected to computers which then operate as stratum-1 servers. A stratum 1 time server acts as a primary network time standard.
NEW QUESTION 159
Refer to the exhibit.
A network architect has partially configured static NAT. which commands should be asked to complete the configuration?
- A. R1(config)#interface GigabitEthernet0/0 R1(config)#ip nat inside
R1(config)#interface GigabitEthernet0/1 R1(config)#ip nat outside - B. R1(config)#interface GigabitEthernet0/0 R1(config)#ip nat outside
R1(config)#interface GigabitEthernet0/1 R1(config)#ip nat inside - C. R1(config)#interface GigabitEthernet0/0 R1(config)#ip pat outside
R1(config)#interface GigabitEthernet0/1 R1(config)#ip pat inside - D. R1(config)#interface GigabitEthernet0/0 R1(config)#ip pat inside
R1(config)#interface GigabitEthernet0/1 R1(config)#ip pat outside
Answer: B
NEW QUESTION 160
Which statement about VXLAN is true?
- A. VXLAN uses TCP 35 the transport protocol over the physical data cento network
- B. VXLAN extends the Layer 2 Segment ID field to 24-bits. which allows up to 4094 unique Layer 2 segments over the same network.
- C. VXLAN encapsulates a Layer 2 frame in an IP-UDP header, which allows Layer 2 adjacency across router boundaries.
- D. VXLAN uses the Spanning Tree Protocol for loop prevention.
Answer: C
Explanation:
802.1Q VLAN identifier space is only 12 bits. The VXLAN identifier space is 24 bits. This doubling in
size allows the VXLAN ID space to support 16 million Layer 2 segments -> Answer 'VXLAN extends
the Layer 2 Segment ID field to 24-bits, which allows up to 4094 unique Layer 2 segments over
the same network' is not correct.
VXLAN is a MAC-in-UDP encapsulation method that is used in order to extend a Layer 2 or Layer 3
overlay network over a Layer 3 infrastructure that already exists.
Reference:
lan-and-ethernet-virt.html
NEW QUESTION 161
A network administrator is preparing a Python scrip to configure a Cisco IOS XE-based device on the network. The administrator is worried that colleagues will make changes to the device while the script is running. Which operation of he in client manager prevent colleague making changes to the device while the scrip is running?
- A. m.lock(config='running')
- B. m.freeze(config='running')
- C. m.freeze(target='running')
- D. m.lock(target='running')
Answer: D
Explanation:
The example below shows the usage of lock command:
def demo(host, user, names):
With manager. Connect(host=host, port=22, username=user) as m:
With m.locked(target='running'):
for n in names:
m.edit_config (target='running', config=template % n)
The command "m.locked (target='running')" causes a lock to be acquired on the
running datastore.
NEW QUESTION 162
Which feature of EIGRP is not supported in OSPF?
- A. load balance over four equal-costs paths
- B. load balancing of unequal-cost paths
- C. per-packet load balancing over multiple paths
- D. uses interface bandwidth to determine best path
Answer: B
Explanation:
Explanation
YANG (Yet another Next Generation) is a data modeling language for the definition of data sent over network management protocols such as the NETCONF and RESTCONF.
NEW QUESTION 163
Which resource is able to be shared among virtual machines deployed on the same physical server?
- A. disk
- B. applications
- C. operating system
- D. VM configuration file
Answer: A
NEW QUESTION 164
An engineer reviews a router's logs and discovers the following entry. What is the event's logging severity level?
- A. informational
- B. notification
- C. warning
- D. error
Answer: D
NEW QUESTION 165
Which protocol is implemented to establish secure control plane adjacencies between Cisco SD-WAN nodes?
- A. IKE
- B. ESP
- C. DTIS
- D. IPsec
Answer: D
NEW QUESTION 166
......
Cisco 350-401 Dumps - Secret To Pass in First Attempt: https://www.itpassleader.com/Cisco/350-401-dumps-pass-exam.html
350-401 Practice Test Questions Updated 305 Questions: https://drive.google.com/open?id=1xF0wPrv8DoRIKAh5EBA5FQjVtsOFB_Yk