[Nov 10, 2024] D-VXR-DY-01 Exam Dumps - 100% Marks In D-VXR-DY-01 Exam!
Exam Dumps Use Real Dell Hyperconverged Infrastructure Dumps With 345 Questions!
NEW QUESTION # 55
What is required to enable vSAN encryption on a VxRail cluster?
- A. Internal vCenter Server
Internal Key Management Server - B. Internal vCenter Server
External Key Management Server - C. External vCenter Server
External Key Management Server - D. All-Flash system
External Key Management Server
Answer: C
NEW QUESTION # 56
After a successful installation, where in VxRail Manager should you collect logs?
- A. CONFIG > System > Log Collection > Diagnose
- B. CONFIG > General > System Diagnostics > Generate New Log Bundle
- C. CONFIG > General > Log Collection > Generate New Log Bundle
- D. CONFIG > System > System Diagnostics > Diagnose
Answer: A
NEW QUESTION # 57
Which series of VxRail nodes supports either Intel or AMD processors and either hybrid or All-Flash storage?
- A. E Series
- B. V Series
- C. D Series
- D. G Series
Answer: A
NEW QUESTION # 58
Which VxRail model can only be installed with static rack rails?
- A. S Series
- B. V Series
- C. P Series
- D. G Series
Answer: D
NEW QUESTION # 59
What action is required to enable VxRail Manager the ability to update system software and browse VxRail KB articles?
- A. Configure Proxy settings
- B. Set the appliance status to 'Installed' in the Dell EMC Install database
- C. Set the Username and Password for the Support Account
- D. Enable Secure Remote Support (SRS)
Answer: C
NEW QUESTION # 60
An implementation engineer is configuring the network firewall to support a VxRail installation.
Where can they find the necessary firewall rules?
- A. Network Validation Tool
- B. VxRail Configuration Portal
- C. Rack worksheet of the Network PEQ
- D. As-Built Configuration Report
Answer: D
NEW QUESTION # 61
According to the VxRail PEQ Engagement Details worksheet, links to what resources should the SE send to the customer?
- A. VxRail vCenter Server Planning Guide
Network Validation Tool - B. VxRail QuickStart Guide
Network Validation Tool - C. VxRail QuickStart Guide
VxRail Network Planning Guide - D. VxRail vCenter Server Planning Guide
VxRail Network Planning Guide
Answer: B
NEW QUESTION # 62
A customer is performing self-deploy of a VxRail cluster. The VxRail Deployment Wizard fails to launch. The software appears to be corrupted.
What should they do to address the issue?
- A. Contact Dell support and request the nodes be reimaged.
- B. Verify that the Configuration file is not corrupt and has all the required values.
- C. Use the VMware Host Client and iDRAC to access the nodes and troubleshoot the issue.
- D. Use the vSphere Client and troubleshoot the issue.
Answer: A
NEW QUESTION # 63
A company has indicated that they do not want to change the native VLAN for their entire switch.
Based on best practice, how should the Top of Rack (ToR) switch be configured?
- A. Set the native VLAN on the switch ISL ports
- B. Set the native VLAN only at the VxRail trunk ports
- C. Do not configure ToR switch native VLAN and instead tag the VLAN on VxRail
- D. The native VLAN for the switch must be set
Answer: A
NEW QUESTION # 64
Which vCenter Server option must be selected in the VxRail Deployment Wizard to choose a vCenter not hosted within the same cluster?
- A. VxRail-Provided vCenter Server
- B. Customer-Provided vCenter Server
- C. External vCenter Server
- D. Internal (VxRail Manager Service)
Answer: B
NEW QUESTION # 65
You are expanding an existing 6 node VxRail V470F cluster by adding two additional V570F nodes.
What is the minimum VxRail version that will support this configuration?
- A. 4.5.150
- B. 4.5.200
- C. Mixed clusters are not supported
- D. 4.5.070
Answer: D
NEW QUESTION # 66
A VxRail 7.0.100 environment is managed by the internal vCenter Server. The customer asks the implementation engineer to deploy a new VxRail cluster using the existing vCenter Server.
What should the response of the engineer?
- A. Supported by neither the internal vCenter Server nor external vCenter Server
- B. Not supported for internal vCenter Server
- C. Not supported on VxRail software 7.0.100
- D. Only supported on VxRail software 4.7.xxx
Answer: C
NEW QUESTION # 67
A company wants to deploy VxRail on V Series nodes as a proof-of-concept (POC). Only one Top of Rack (ToR) switch has been provided for the POC.
What is the Dell EMC best practice recommendation in this situation?
- A. Inform the company that the POC cannot proceed without a second ToR switch.
- B. Connect the first host NIC to the TOR switch. Daisy chain the second NIC between hosts.
- C. Connect the first host NIC to the ToR switch. Leave the second host NIC un-cabled.
- D. Connect each host NIC to a port on a different switch packet buffer bank on the ToR switch. Balance the ports across two packet buffer banks.
Answer: D
NEW QUESTION # 68
Where is the VxRail Manager pre-installed on a newly shipped, 4 node VxRail Model G410 system?
- A. Bottom-right node from the front
- B. First node
- C. All nodes
- D. Node with the highest serial number
Answer: B
NEW QUESTION # 69
A system administrator wants to collect a generated log file via the VxRail REST API.
Which command should they use?
- A. GET /v1/support/logs/<Log_ID>
- B. GET /v1/support/logs/<Log_ID>/download
- C. POST /v1/support/logs/<Log_ID>/download
- D. POST /v1/support/logs/
Answer: B
NEW QUESTION # 70
A VxRail cluster is being installed with Dell ToR switches at a "dark site." The administrator is not able to use the NVT tool.
Which command can they run on the ToR to verify VLANs are created, active, and properly configured on the uplink ports?
- A. show vlan
- B. show port-channel summary
- C. ping default gateway
- D. show interface status
Answer: A
NEW QUESTION # 71
You want to deploy VxRail, leveraging your existing VMware SSO domain.
What is the recommended method?
- A. Deploy to an External vCenter
- B. Configure Embedded vCenter in Enhanced Linked Mode
- C. Deploy External vCenter with no PSC
- D. Deploy Embedded vCenter with Embedded PSC
Answer: A
NEW QUESTION # 72
Refer to the Exhibit which shows a red box around a node PSNT.
What is a characteristic of the node marked by the red box?
- A. VxRail node hosting the DNS server.
- B. VxRail node that can be excluded from the initial VxRail build.
- C. VxRail Primary node hosting the NTP and DNS servers.
- D. VxRail Primary node hosting the VxRail Manager VM.
Answer: D
NEW QUESTION # 73
A customer requires a Stretched VxRail Cluster with S570 nodes in its minimal configuration.
Which setup will fulfill the requirement?
- A. 3+3 nodes
- B. 4+4 nodes
- C. 2+2 nodes
- D. 6+6 nodes
Answer: A
NEW QUESTION # 74
......
Pass Your D-VXR-DY-01 Exam Easily With 100% Exam Passing Guarantee: https://www.itpassleader.com/EMC/D-VXR-DY-01-dumps-pass-exam.html
D-VXR-DY-01 Dumps are Available for Instant Access: https://drive.google.com/open?id=1D61cYrKnZ8MgD8LMG4JCz2Xt3OhEyrQH