Prepare LEED-AP-ND Question Answers Free Update With 100% Exam Passing Guarantee [2025]
Dumps Real USGBC LEED-AP-ND Exam Questions [Updated 2025]
NEW QUESTION # 34
A 10-acre ((our hectare) project has 5.000 ft (1 524 m) of sidewalks Trees and trellises are planned along several ofthose blocks to provide shading for the sidewalks In order to achieve Neighborhood Pattern and Design Credit Tree-Lined and Shaded Streetscapes. what is the minimum shaded sidewalk that would need to be provided?
- A. 4,000 ft. (1 220 m)
- B. 3,000 ft. (915 m)
- C. 2,000 ft. (610 m)
- D. 1,000 ft. (305 m)
Answer: B
Explanation:
To achieve the Neighborhood Pattern and Design Credit for Tree-Lined and Shaded Streetscapes, a minimum of 60% of the total sidewalk length must be shaded within ten years of landscape installation. For a project with 5,000 feet (1,524 meters) of sidewalks, 60% equates to 3,000 feet (915 meters) of shaded sidewalk. This requirement encourages the development of pedestrian-friendly environments that provide comfort and reduce the urban heat island effect, contributing to the sustainability and livability of the neighborhood.
NEW QUESTION # 35
To ensure that future residents of a project are allowed to grow produce in side yards, balconies or rooftops.
Neighborhood Pattern and Design Credit. Local Food Production requires a developer to
- A. establish appropriate covenants, conditions, and restrictions.
- B. establish a community supported agriculture program.
- C. retain an on-site garden management company.
- D. register the protect with American Farmland Trust.
Answer: A
Explanation:
To comply with the Neighborhood Pattern and Design Credit for Local Food Production, establishing appropriate covenants, conditions, and restrictions (CC&Rs) is necessary. These legal instruments ensure that future residents have the right to grow produce on their property, including side yards, balconies, or rooftops.
CC&Rs are binding agreements that are recorded with the property deed, ensuring long-term adherence to sustainable practices. Options likeretaining a garden management company or registering with the American Farmland Trust do not directly fulfill the requirements for ensuring residents' rights to grow produce.
These answers align with the LEED for Neighborhood Development guidelines and aim to support sustainable community planning and development practices.
NEW QUESTION # 36
Winch of the following minor improvements withina required buffer zone may be undertaken to enhance appreciation for a wetland or body of water, provided such facilities are open to public access?
- A. Create new clearings, not exceeding 1.000 ft2 (95 m2) each, for tables, benches and access for recreational watercraft
- B. Remove hazardous trees, up to 100% of dead trees, and trees less than eight in. (20 cm) in diameter at breast height
- C. Build one single-story structure not exceeding 1.000 ft2 (93 m2) per 300 linear feet of Outer, on average
- D. Add bicycle and pedestrian pathways that are no more than 12 ft. (3.5 m) wide and where no more than
8 ft. (2.5 m) of their width may be impervious
Answer: D
Explanation:
Within the required buffer zone around a wetland or body of water, minor improvements such as the addition of bicycle and pedestrian pathways are permitted under specific conditions. The pathways must not exceed 12 feet (3.5 meters) in width, and no more than 8 feet (2.5 meters) of their width can be impervious (non- permeable).
* Buffer Zone Requirements:LEED-ND has strict guidelines for protecting wetlands and water bodies to maintain their ecological integrity. However, the rating system allows for certain minor improvements within these buffer zones to enhance public access and appreciation of these natural features.
* Pathway Specifications:The specified limits on the width and imperviousness of the pathways ensure that the improvements do not significantly disrupt the natural hydrology or increase runoff into the wetland or water body. By limiting the impervious surface area, the pathways allow for better water infiltration and reduce the potential for erosion or other negative impacts on the ecosystem.
* Public Access:Providing public access through such pathways aligns with LEED's goals of promotingsustainable and healthy communities by encouraging outdoor recreation and non-motorized transportation while preserving the natural environment.
* The LEED Reference Guide for Neighborhood Development provides detailed criteria for permissible activities within buffer zones.
* TheLEED v4 Neighborhood Developmentdocumentation further elaborates on the conditions under which minor improvements, like pathways, can be implemented.
Detailed Explanation:References:For additional details, refer to:
* LEED Reference Guide for Neighborhood Development
* LEED v4 Neighborhood Development
NEW QUESTION # 37
For Neighborhood Patternand Design Tree-Lined and Shaded Streetscapes Credit- Option 2 Shaded Sidewalks.what size ofnewly planted trees can be considered in calculating the percentage or shaded sidewalks?
- A. Crown diameter at time of planting
- B. Crown din motor five years after planling
- C. Crown diameter 10 years after planting
- D. Crown diameter at time of purchase
Answer: C
Explanation:
For the Neighborhood Pattern and Design Credit for Tree-Lined and Shaded Streetscapes, Option 2: Shaded Sidewalks, the crown diameter of newly planted trees used in calculating the percentage of shaded sidewalks is based on their expected size 10 years after planting.
* Shaded Sidewalks Credit:This credit aims to increase the comfort and usability of sidewalks by ensuring they are shaded, reducing heat exposure and improving the pedestrian experience. The shade coverage must be calculated based on the anticipated tree canopy.
* Crown Diameter Calculation:LEED requires that the shading potential of newly planted trees be projected based on the tree's expected crown diameter 10 years after planting. This approach ensures that the shading provided is realistic and sustainable over time.
* Long-Term Planning:Using the 10-year crown diameter allows project teams to plan for the future growth of trees and ensure that sidewalks will be adequately shaded as the neighborhood matures. This long-term perspective is crucial for maintaining sustainable urban environments.
* The LEED Reference Guide for Neighborhood Development specifies how to calculate tree canopy coverage and how future growth is factored into these calculations.
* TheLEED v4 Neighborhood Developmentdocumentation provides additional guidelines on selecting tree species and projecting their growth.
Detailed Explanation:References:For more detailed guidance, refer to:
* LEED Reference Guide for Neighborhood Development
* LEED v4 Neighborhood Development
These answers provide a comprehensive understanding of the requirements and best practices for achieving LEED-ND credits in specific scenarios.
NEW QUESTION # 38
A project is pursuing Neighborhood Pattern and Design Credit. Local Food Production Restrictions in deeds or covenants, conditions, and restrictions (CC&Rs) may prohibit greenhouses in which location?
- A. Front yards facing the circulation network
- B. Back yards
- C. Side yard facing the circulation network
- D. Rooftops
Answer: A
NEW QUESTION # 39
Which of the following strategies is a best practice for reducing a project's development footprint?
- A. Implement a construction erosion and sedimentation control plan
- B. increase the amount of impervious area on-site
- C. Provide parking under or within a building structure
- D. Increase the number of cul-de-sacs throughout the site
Answer: C
Explanation:
Reducing a project's development footprint is critical for minimizing environmental impact, particularly in terms of land use and site development. Providing parking under or within a building structure is considered a best practice because it reduces the amount of land required for parking, thereby conserving open space and reducing impervious surfaces. This strategy alignswith LEED's goals of minimizing the environmental footprint of development projects. Increasing impervious areas or the number of cul-de-sacs would have the opposite effect, leading to more extensive land disturbance and potential environmental degradation.
NEW QUESTION # 40
A mixed-use development's total building area is 1.742.400 ft1 (161 874 m2) with 350 planned dwelling units Within a 1/2 mi. (08 km) walking distance are 20 diverse uses totaling 550.000 ft2 (51 096 m2) and 375 full- time jobs.
To achieve Smart Location and Linkage Credit. Housing and Jobs Proximity, what is the minimum areaof the residential component ofthe project?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 41
A project site would automatically comply with Smart Location and Linkage Prerequisite. Wetland and Water Body Conservation if the project site is
- A. On previously distributed land
- B. A brownfield redevelopment.
- C. An infill site
- D. An adjacent site
Answer: B
Explanation:
TheSmart Location and Linkage Prerequisite: Wetland and Water Body Conservationin LEED for Neighborhood Development aims to protect natural hydrological systems by ensuring that development does not negatively impact wetlands and water bodies. Projects must avoid development on land that would disrupt these sensitive ecological areas or mitigate their impact if such development is unavoidable.
* Option C: A brownfield redevelopmentis the correct answer because brownfield sites are typically previously developed lands that may have been contaminated or disturbed. When a project is located on a brownfield site, it avoids impacting previously undisturbed wetlands or water bodies, as brownfields have already undergone substantial disturbance. LEED incentivizes the reuse and redevelopment of such sites as it aligns with sustainable land-use practices and avoids the need to develop on pristine or sensitive environmental areas, including wetlands and water bodies. Therefore, projects on brownfield sites automatically comply with the Wetland and Water Body Conservation prerequisite (Reference:
LEED v4 ND Reference Guide).
* Option A: An infill sitemay or may not comply automatically with this prerequisite depending on whether the site includes or affects wetlands or water bodies. Infill sites can be adjacent to or even contain sensitive areas.
* Option B: An adjacent sitedoes not necessarily ensure compliance with this prerequisite. Adjacent development could still affect nearby wetlands or water bodies if it is not planned carefully.
* Option D: On previously disturbed landdoes not guarantee compliance, as previously disturbed land may still contain wetlands or be near water bodies that require protection.
In summary,brownfield redevelopmentprojects inherently avoid negatively impacting wetlands and water bodies, makingOption Cthe correct choice for automatic compliance with the Wetland and Water Body Conservation prerequisite.
NEW QUESTION # 42
Atleast how many buildings within a LEED for Neighborhood Development project must be certified by a green building rating system?
- A. One building
- B. Four buildings
- C. Three buildings
- D. Two buildings
Answer: A
Explanation:
For a LEED for Neighborhood Development project, at least one building within the project must be certified by a green building rating system. This requirement ensures that thedevelopment incorporates at least one example of sustainable building practices, setting a standard for the rest of the neighborhood. This certification demonstrates a commitment to green building principles and serves as a benchmark for the project's overall sustainability.
NEW QUESTION # 43
A non-Infill site has prime agricultural soils in areas of the site where construction is planned. Which would contribute to meeting the Smart Location and Linkage Prerequisite. Agricultural Land Conservation?
- A. Transfer the project's development rights to another location
- B. Fund and organize a community supported agriculture (CSA) program
- C. Remove the prime agricultural sails and piano them on existing farmland
- D. Purchase off-site comparable soil easements to mitigate the loss of affected soils
Answer: D
Explanation:
The LEED for Neighborhood Development (LEED ND) rating system encourages sustainable development practices that promote smart growth, urbanism, and green building. One of the key prerequisites under the Smart Location and Linkage (SLL) category is Agricultural Land Conservation, which aims to protect prime agricultural soils and important farmlands.
In the context of the provided scenario where a non-infill site has prime agricultural soils in areas planned for construction, the prerequisite emphasizes minimizing the impact on these valuable soils. The correct strategy, according to the LEED ND standards, is to purchase off-site comparable soil easements to mitigate the loss of affected soils (option D). This approach aligns with the intent to conserve agricultural land by ensuring that the lost agricultural capacity is compensated for elsewhere.
References:
* LEED v4 Neighborhood Development Guide: This document outlines the prerequisites for Smart Location and Linkage, emphasizing the protection of prime agricultural lands (USGBC, LEED v4 Neighborhood Development Current Version).
* LEED Reference Guide for Neighborhood Development: Provides detailed criteria and acceptable measures for fulfilling the Agricultural Land Conservation prerequisite (USGBC, LEED Reference Guide for Neighborhood Development).
* USGBC Official Website: The USGBC page on LEED for Neighborhood Development discusses the importance of conserving prime agricultural soils and the acceptable strategies for mitigating the loss of these resources (USGBC, LEED for Neighborhood Development Rating System).
This approach is preferred as it ensures that the loss of valuable agricultural land due to development is compensated by protecting an equivalent area of prime agricultural soils, thus supporting the broader goals of sustainability and conservation within the LEED ND framework.
NEW QUESTION # 44
A square site with four equally sized neighboring parcels isbeing considered for a LEEDfor Neighborhood Development project.Consider the following: on the north side of the site is forest land; on the east side Is a church located on a parcel that is 100% developed: and on the south side is a schoollocated on a parcel that is
50% developed. Which one of the following uses on the west side would make this an infill site?
- A. A market on a parcel that is 50% developed
- B. A library on a parcel that is 75% developed
- C. A parcel that is 100% farmland
- D. A post office on a parcel that is 25% developed
Answer: B
Explanation:
For a site to qualify as an infill site under LEED for Neighborhood Development, at least 75% of the boundary must border parcels that are developed, meaning they have been previously disturbed by human activity. In this scenario, the addition of a library on a parcel that is 75% developed on the west side of the site would meet the criteria for an infill site because it would ensure that the site is surrounded by developed parcels.
* Infill Development Criteria:Infill development is central to the LEED-ND program as it encourages the use of land within existing urban areas rather than contributing to urban sprawl. The requirement that 75% of the boundary borders developed parcels ensures that the site is integrated into an already developed area, making it easier to connect to existing infrastructure and services.
* Development Status of Parcels:The key factor in determining whether a site qualifies as infill is the extent of development on adjacent parcels. A parcel is considered developed if a significant portion (typically 50% or more) has been altered by human activity, such as buildings, roads, or other infrastructure.
* Scenario Analysis:In the given scenario:
* North: Forest land (undeveloped)
* East: Church (100% developed)
* South: School (50% developed)
* West: The library (75% developed)
Detailed Explanation:The addition of the library on a 75% developed parcel ensures that the site meets the infill criteria, as it increases the percentage of the boundary that is adjacent to developed parcels.
* The LEED-ND Reference Guide provides criteria for what constitutes infill development under the Smart Location & Linkage (SLL) category.
* Detailed guidelines and examples can be found in theLEED v4 Neighborhood Development documentation, which clarifies the requirements for infill sites.
References:For more comprehensive information, consult the following resources:
* LEED Reference Guide for Neighborhood Development
* LEED v4 Neighborhood Development
NEW QUESTION # 45
Which of thefollowing site conditions should be considered in the selection of renewable energy technologies for Green Infrastructure and Buildings Credit. Renewable Energy Production?
- A. Annual precipitation levels
- B. Wind exposure
- C. Elevation above the 100-year flood plain
- D. Distance from a wetland
Answer: B
Explanation:
When selecting renewable energy technologies for the Green Infrastructure and Buildings Credit for Renewable Energy Production, site conditions such as wind exposure are crucial considerations. Wind exposure directly affects the feasibility and efficiency of wind energy systems, making it a key factor in determining whether wind turbines or other wind-based energy systems can be effectively implemented.
While other factors like distance from a wetland orelevation above the floodplain are important for site selection, they are not directly related to the efficiency of renewable energy technologies like wind exposure is.
NEW QUESTION # 46
What reference standard is used to determine compliance with Green Infrastructure and Buildings Prerequisite. Minimum Building Energy Performance when the whole building energy modeling option is used?
- A. ASHRAE 62.1-2010
- B. ASHRAE 90.1-2010
- C. ASHRAE 55-2010
- D. ASHRAE 90.1-2007
Answer: B
Explanation:
When using the whole building energy modeling option to determine compliance with the Green Infrastructure and Buildings Prerequisite for Minimum Building Energy Performance, the reference standard used is ASHRAE 90.1-2010. This standard provides the minimum requirements for energy-efficient design of buildings, excluding low-rise residential buildings. It is a widely recognized benchmark for energy performance in the United States and is used as the basis for LEED energy modeling requirements.
NEW QUESTION # 47
The LEED for Neighborhood DevelopmentRating System considers which ofthe following to be a circulation network?
- A. Entrance and exit ways for vehicular use into and out of parking lots or structures
- B. Spaces dedicated to non-motorized travel for project occupants to use for travel between buildings
- C. Dedicated rights-of-way for fixed-rail transit service
- D. All motorizednon-motorized and mixed-mode travel ways permanently accessible in thepublic
Answer: D
Explanation:
The LEED for Neighborhood Development (LEED ND) Rating System defines a "circulation network" as an interconnected network that includes all travel ways that facilitate the movement of people within a neighborhood. This encompasses motorized, non-motorized, and mixed-mode travel ways that are permanently accessible to the public. The purpose of this network is to ensure a comprehensive and integrated system that supports all modes of transportation, thereby promoting accessibility, safety, and sustainability within the neighborhood. The focus on inclusivity in the definition ensures that all possible methods of transit-whether by foot, bicycle, car, or public transport-are considered part of this network.
NEW QUESTION # 48
A project team has achieved the require men is for Neighborhood Pattern and Design Credit. Community Outreach and Involvement. Option 1: Community Outreach. Which of the following additional actions would earn the project a total or two points?
- A. Conduct an Interactive workshop open to the public for at least two days
- B. Modify Die projects conceptual design as a direct result of community input
- C. Establish ongoing moans for communication between the developer and the community
- D. Obtain full entitlement and endorsements from the local land use and Building permitting jurisdictions
Answer: C
Explanation:
To earn a total of two points under the Neighborhood Pattern and Design Credit for Community Outreach and Involvement, after achieving the requirements for Option 1: Community Outreach, a project team can establish ongoing means for communication between the developer and the community. This action demonstrates a long-term commitment to involving the community in the development process and ensuring that their concerns and input continue to be addressed as the project progresses.
* Community Outreach and Involvement Credit:This credit aims to ensure that the project is developed with input from the community, fostering transparency and collaboration between developers and residents. Achieving this credit not only helps in gaining community support but also improves the overall sustainability and livability of the project.
* Establishing Ongoing Communication:While the initial community outreach typically involves workshops or meetings to gather input during the preliminary design phase, establishing ongoing communication channels ensures that the community remains informed and engaged throughout the development process. This could include regular newsletters, dedicated websites, or community liaison officers.
* Benefits of Ongoing Communication:Continuous communication helps address any issues or concerns that may arise during construction or after the project is completed. It also allows the developer to update thecommunity on progress, gather feedback on any changes, and maintain a positive relationship with the neighborhood.
* The LEED Reference Guide for Neighborhood Development details the requirements for achieving points under the Community Outreach and Involvement credit, including the benefits of establishing ongoing communication.
* TheLEED v4 Neighborhood Developmentdocumentation provides further examples of effective community engagement strategies that contribute to long-term project success.
Detailed Explanation:References:For more information, refer to:
* LEED Reference Guide for Neighborhood Development
* LEED v4 Neighborhood Development
NEW QUESTION # 49
According to the Minimum Program Requirements, a LEED for Neighborhood Development project should contain at least how many habitable buildings?
- A. Two building
- B. One Building
- C. Four buildings
- D. Three buildings
Answer: B
Explanation:
According to the Minimum Program Requirements (MPRs) for LEED for Neighborhood Development, a project must contain at least one habitable building to be eligible for certification. This ensures that the project contributes to creating a functional neighborhood with actual habitable space, rather than just being open land or non-habitable structures. This requirement is fundamental for establishing the neighborhood as a living, functioning community.
NEW QUESTION # 50
The LEED for Neighborhood Development project learn is tabulating the potential number of points. What is the maximum number of points the team can earn through Regional Priority credits?
- A. Eight points
- B. Two points
- C. Four points
- D. Six points
Answer: C
Explanation:
In LEED for Neighborhood Development, the maximum number of points that a project team can earn through Regional Priority credits is four. Regional Priority credits are designed to address geographically specific environmental, social, and public health priorities.
* Regional Priority Credits:LEED-ND offers Regional Priority credits to encourage project teams to focus on regional environmental issues. These credits are identified by USGBC based on specific local priorities and challenges, such as water scarcity, air quality, or habitat protection.
* Point Allocation:A project can earn up to four Regional Priority points. These points are awarded in addition to the points earned for achieving the underlying credits that have been identified as regional priorities. The total number of Regional Priority points achievable does not exceed four, regardless of how many regional priority credits a project may be eligible for.
* Geographic Relevance:The credits eligible for Regional Priority points vary depending on the project's location. USGBC provides a list of Regional Priority credits based on the project's ZIP code or similar geographic identifier.
* The LEED Reference Guide for Neighborhood Development provides detailed instructions on how to identify and achieve Regional Priority credits.
* TheLEED v4 Neighborhood Developmentdocumentation outlines the process for determining which credits are eligible as Regional Priority credits based on location.
Detailed Explanation:References:For more comprehensive details, consult:
* LEED Reference Guide for Neighborhood Development
* LEED v4 Neighborhood Development
NEW QUESTION # 51
For a 100% previously developed site, which of the following steps should the project team take during the Initial stages of planning to meet the requirements of Smart Location and Linkage Prerequisite. Imperiled Species and Ecological Communities Conservation?
- A. Work with a qualified biologist to restore ecological communities, using only native plants on at least
10% of the development footprint - B. Create conservation easements to prepare for the possibility that threatened or endangered species are found after the site plan has been approved
- C. Take minimum precautions A 100% previously developed site meets the requirements
- D. Consult with the state Natural Heritage Program and state fish and wildlife agencies to determine if there are any threatened or endangered species on the site.
Answer: D
Explanation:
Even for a 100% previously developed site, it is essential to assess the presence of any threatened or endangered species before proceeding with development. The Smart Location and Linkage Prerequisite for Imperiled Species and Ecological Communities Conservation requires the project team to consult with relevant state and local agencies, such as the state Natural Heritage Program and state fish and wildlife agencies. This consultation is necessary to determine if any threatened or endangered species are present on the site. If such species are found, appropriate measures must be taken to protect them, even on previously developed sites.
References:
* LEED v4 Neighborhood Development Guide: Discusses the requirements for protecting imperiled species and ecological communities, even on previously developed sites (USGBC, LEED v4 Neighborhood Development Current Version).
* LEED Reference Guide for Neighborhood Development: Provides specific instructions on consulting with environmental agencies to meet the prerequisite requirements (USGBC, LEED Reference Guide for Neighborhood Development).
NEW QUESTION # 52
A project builds a central plant that burns biomass products to provide space heating and hot water to the development. Which ofthe following Green Infrastructure and Buildings credits could this help the project achieve?
- A. Solar Orientation
- B. Infrastructure Energy Efficiency
- C. indoor Water Use Reduction
- D. District Heating and Cooling
Answer: D
Explanation:
The development of a central plant that burns biomass products to provide space heating and hot water is directly aligned with the Green Infrastructure and Buildings Credit for District Heating and Cooling. This credit rewards projects that implement district energy systems that use renewable energy sources, such as biomass, to provide heating and cooling to multiple buildings in a development. By using biomass, the project reduces reliance on fossil fuels, lowersgreenhouse gas emissions, and increases energy efficiency, all of which are key objectives of this credit.
References:
* LEED v4 Neighborhood Development Guide: This document details the requirements for achieving the District Heating and Cooling credit, including the use of renewable energy sources like biomass (USGBC, LEED v4 Neighborhood Development Current Version).
* LEED Reference Guide for Neighborhood Development: This guide provides a comprehensive overview of how district energy systems can contribute to credit achievement, specifically focusing on the sustainability benefits of biomass and other renewable energy sources (USGBC, LEED Reference Guide for Neighborhood Development).
* USGBC Official Website: The website provides information on the Green Infrastructure and Buildings credits, including District Heating and Cooling, and highlights the advantages of using renewable energy in central plants (USGBC, LEED for Neighborhood Development Rating System).
NEW QUESTION # 53
Which of the following credits or prerequisites requires a calculation ofIntersections per square mile for square kilometer)?
- A. Smart Location and Linkage Credit. Access to Quality Transit
- B. neighborhood Pattern and Design Credit. Walkable Streets
- C. Smart Location and Linkage Credit,Bicycle Facilities
- D. Neighborhood Pattern and Design Prerequisite,Connected and Open Community
Answer: D
Explanation:
The calculation of intersections per square mile (or per square kilometer) is required for the Neighborhood Pattern and Design Prerequisite for Connected and Open Community. This prerequisite is designed to ensure that the neighborhood has a well-connected street network,which facilitates walking, biking, and reduces the reliance on automobiles. The number of intersections per square mile is a key metric used to assess the connectivity and openness of the community's street network, which is essential for creating sustainable and accessible neighborhoods.
NEW QUESTION # 54
According to Green Infrastructure and Buildings Prerequisite. Indoor Waler Use Reduction, the indoor water usage of a new building or buildings undergoing major renovations (nonresidential buildings, mixed-use buildings, and multifamily tour stones or more), must average at least
- A. 30% loss than in baseline buildings
- B. 10% less than in baseline buildings.
- C. 50% less than in baseline buildings.
- D. 20% less thanin baseline buildings.
Answer: D
Explanation:
The Green Infrastructure and Buildings Prerequisite for Indoor Water Use Reduction requires that the indoor water usage of new buildings or buildings undergoing major renovations must average at least 20% less than in baseline buildings. This prerequisite is aimed at promoting water conservation through the use of efficient plumbing fixtures, appliances, and systems, contributing to the overall sustainability of the project by reducing water demand and minimizing the strain on local water resources.
NEW QUESTION # 55
A project Is planning a new bus service and shelters to service a new community. Which of the following would be required to meet the Neighborhood Pattern and Design Credit. Transit Facilities?
- A. Provide a park and ride parking, lot within 150 ft. (46 m) ofthe transit shelter
- B. Provide points of connectivity of 140 street intersections per square mile
- C. Display transit schedules and route information at each publictransit stop
- D. Transit agency confirmation that additional weather protected transit shelters will be provided within five years of protect completion.
Answer: C
Explanation:
To meet the Neighborhood Pattern and Design Credit for Transit Facilities, it is required to display transit schedules and route information at each public transit stop. This requirement ensures that transit users have access to up-to-date and accurate information, making public transportation more accessible and user-friendly, which supports increased transit use and reduces reliance on private vehicles. The other options, such as providing park and ride lots or intersection connectivity, while beneficial, do not directly address the requirements of this specific credit.
NEW QUESTION # 56
Which of the following are eligible sources of renewable energy under Green Infrastructure and Buildings Credit. Renewable Energy Production?
- A. Cogeneration of electricity and heat using mill residue biomass
- B. Geothermal energy used in conjunction with a ground-source Moat pump
- C. Passive solar heating strategies offsetting heating energy use
- D. Photovoltaic energy generation purchased from an off-site location
Answer: A
Explanation:
For the Green Infrastructure and Buildings Credit related to Renewable Energy Production, cogeneration of electricity and heat using mill residue biomass is an eligible source of renewable energy. This process, also known as combined heat and power (CHP), efficiently uses biomass to generate both electricity and thermal energy, reducing overall energy consumption and greenhouse gas emissions. Passive solar heating strategies, while beneficial for reducing energy demand, do not directly produce renewable energy. Geothermal energy used with a ground-source heat pump is generally considered energy efficiency rather than renewable energy.
Photovoltaic energy generation from off-site locations may not qualify unless it is directly tied to the project.
NEW QUESTION # 57
A project site is located in a Federal Empowerment Zone What Is also needed to qualify the protect tor Smart Location and Linkage Credit. Preferred Locations Option 3: Designated High-Priority Locations?
- A. Provide 10% of total rental units priced up to 60% area median income (AMI)
- B. Locate the project on an adjacent site that is also a previously disturbed site
- C. Use no more than 20% of the total development footprint area for off-street surface parking, with no individual surface parking lot larger than two acres (0.8 hectare)
- D. Locate the project such that 50% of its dwelling units are within a 1/4 ml.(0.4 km) walking distance of at least seven diverse uses
Answer: A
Explanation:
For a project located in a Federal Empowerment Zone to qualify for the Smart Location and Linkage Credit under Preferred Locations Option 3: Designated High-Priority Locations, the project must also meet certain affordability criteria. Specifically, providing at least 10% of total rental units priced at or below 60% of the area median income (AMI) aligns with the requirements for achieving this credit. This ensures that the development supports affordable housing in addition to being located in a high-priority area.
References:
* LEED v4 Neighborhood Development Guide: Details the requirements for Designated High-Priority Locations, including the criteria related to affordable housing (USGBC, LEED v4 Neighborhood Development Current Version).
* LEED Reference Guide for Neighborhood Development: Offers guidance on how to achieve the Preferred Locations credit by meeting affordability thresholds (USGBC, LEED Reference Guide for Neighborhood Development).
NEW QUESTION # 58
......
USGBC LEED-AP-ND Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
LEED-AP-ND Exam Dumps, LEED-AP-ND Practice Test Questions: https://www.itpassleader.com/USGBC/LEED-AP-ND-dumps-pass-exam.html