Unique Top-selling 300-610 Exams - New 2021 Cisco Pratice Exam [Q70-Q93]

Unique Top-selling 300-610 Exams - New 2021 Cisco Pratice Exam

CCNP Data Center Dumps 300-610 Exam for Full Questions - Exam Study Guide

NEW QUESTION 70
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?

A. SAN port channel
B. E-Trunk
C. LACP port channel
D. vPC+

Answer: C

Explanation:
Section: Compute Design

NEW QUESTION 71
Which feature provides a sandbox to convert NX-OS CLI commands to REST-based scripts on Cisco Nexus 7700 Series Switches?

A. Guest shell
B. Postman
C. NX-API
D. Bash shell

Answer: C

NEW QUESTION 72
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects?
(Choose two.)

A. STP runs on the server ports.
B. STP runs on the uplink ports of each VLAN, as defined by MSTP.
C. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
D. The STP parameter configuration is supported.
E. The STP parameter configuration is unsupported.

Answer: C,E

Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html

NEW QUESTION 73
Refer to the exhibit.

A high-availability setup for iSCSI is designed with the host running ISCSI software. Each storage port on the MDS exports the same two Fibre Channel target ports with different ISCSI target names. In this design, how many ISCSI session are created from the host so that recovery occurs if any component fails?

A. 0
B. 1
C. 2
D. 3

Answer: C

Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/fm_3_2/ciscsi.html

NEW QUESTION 74
An engineer must secure the payload traversing across the DCI. The solution must support confidentiality and integrity and it must be open standard. The solution must encrypt Ethernet frames regardless of the upper layer protocol used.
Which technology must be used to support these requirements?

A. MACsec
B. OTV
C. IPsec
D. GRE

Answer: A

Explanation:
Reference:
https://developers.redhat.com/blog/2016/10/14/macsec-a-different-solution-to-encrypt-network-traffic/

NEW QUESTION 75
A engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure. Which tool meets these requirements?

A. Cisco data center network manager
B. Cisco intersight
C. Cisco UCS director
D. Cisco tetration

Answer: B

NEW QUESTION 76
What influences the number of ISLs that are required between Cisco MDS Series switches?

A. type of storage
B. end-to-end oversubscription ratio
C. FCoE protocol
D. N Port virtualization

Answer: B

Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-series-multilayer- directors/white-paper-c11-729697.html

NEW QUESTION 77
Refer to the exhibit.

A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?

A. Each uplink that connects an IOM is configured as a discrete link.
B. Cisco UCS Manager creates a single fabric port channel.
C. The port channel is disabled until an administrator enables it manually.
D. Cisco UCS Manager creates two separate fabric port channels.

Answer: D

NEW QUESTION 78
An engineer must connect an existing Cisco UCS Fabric Interconnect to an IP-based storage array. The connection must be a port channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic.
Which port type should be used to meet these requirements?

A. network
B. appliance
C. uplink
D. server

Answer: C

NEW QUESTION 79
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.

Answer:

Explanation:

NEW QUESTION 80
Which address pool is used when a vHBA template is created?

A. IP
B. WWPN
C. MAC
D. UUID

Answer: B

Explanation:
Section: Automation Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-1/ b_UCSM_GUI_Configuration_Guide_2_1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_011010.html

NEW QUESTION 81
Refer to the exhibit.

What must be the default gateway of the servers in EPG Web?

A. subnet address of BD1
B. NAT appliance
C. subnet address of L3Out
D. subnet address of BD2

Answer: B

NEW QUESTION 82
Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?

A. dedicated compute nodes
B. fabric interconnects
C. HyperFlex Edge support
D. encryption offload cards

Answer: C

Explanation:
Section: Compute Design

NEW QUESTION 83
An engineer is expanding an existing ISCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used
{prefix}. 2019-01.com.acme.123:00. ftd0cb21.bcb389458389
Which addressing scheme was used in the environment?

A. ISCSI Qualified Name
B. Extended Unique identifier
C. Fibre Channel ID
D. Network Address Authority

Answer: A

NEW QUESTION 84
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?

A. PIM anycast RP
B. MSDP
C. Embedded RP
D. Phantom RP

Answer: A

NEW QUESTION 85
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?

A. SAN port channel
B. E-Trunk
C. LACP port channel
D. vPC+

Answer: C

NEW QUESTION 86
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.

Answer:

Explanation:

NEW QUESTION 87
A network engineer is implementing Cisco UCS Manager with Cisco UCS Central integration. The company's strict security policies require that the logical profile of virtual network adapters and logical addressing assigned to Cisco UCS servers be managed by the Cisco UCS Manager. The users must also be prevented from being able to acknowledge pending activities in the Cisco UCS Manager.
Which two profiles must be used to meet these requirements? (Choose two.)

A. public network control
B. restricted chassis
C. global maintenance
D. local power
E. local service

Answer: A,E

NEW QUESTION 88
An engineer is designing a disaster recovery solution. In the event of a node failure, the solution should either direct all of the traffic to another node, or load-balance the traffic across the remaining nodes.
Which solution should be implemented in the design?

A. active/passive
B. cold standby
C. active/active
D. warm standby

Answer: C

NEW QUESTION 89
An engineer is expanding an existing iSCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used:
{prefix}.2019-01.com.acme123:00.ffd0cb21.bcb392817521
Which addressing scheme was used in the environment?

A. Extended Unique Identifier
B. Fibre Channel ID
C. iSCSI Qualified Name
D. Network Address Authority

Answer: A

NEW QUESTION 90
What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)

A. VRF-Lite interfaces can be Layer 2.
B. Interfaces that belong to VRFs can be physical or logical.
C. VRF-Lite interfaces support MPLS.
D. Overlapping IP addresses are permitted on different VRFs.
E. Layer 3 interfaces can belong to multiple VRFs.

Answer: B,D

NEW QUESTION 91
A company must introduce a scalable network automation tool to deploy, configure, and manage thousands of network device and service. The company servers already have been security-hardened and must not have any additional software installed on team. The security policy mandates the use of a secure communication protocol that support authentication and encryption for managing the servers. Which two automation tools must be used to meet these requirements? (Choose two.)