Updated Nov-2021 100% Cover Real 300-425 Exam Questions - 100% Pass Guarantee [Q59-Q84]

Updated Nov-2021 100% Cover Real 300-425 Exam Questions - 100% Pass Guarantee

Use Real Cisco Dumps - 100% Free 300-425 Exam Dumps

What Study Guides Can You Use to Cover 300-425 Topics?

The Cisco Press provides support to candidates for 300-425 test through expert-written books. The CCNP Enterprise Wireless Design 300-425, which is the official guide, allows for one to gain success in the final exam. The book authors are Robert Barton, Jerome Henry, and David Hucaby. These wireless networking experts have developed the book with amazing content that investigates varied aspects of the Cisco 300-425 test. It also was written to cover the requirements of 300-430, which is another concentration test. It authoritatively explains the content in every topic while using practical examples to make you have the right perspective of the same. Particularly, it looks deeply into all the layers of wireless networks and has realistic papers for practice. Here is more of what to draw from this great study guide:

Test preparation software from Pearson that includes numerous well-reviewed questions which are exam-related;
An exam revision routine that has been ascertained to assist in a good exam performance;
A final chapter concerning preparation to offer guidance through resources and tools so that you can develop your strategies for reviewing the content and taking the final exam.
Options to customize the practice questions;
Quizzes that enable decision-making in terms of how long you should take in covering each section;
Exhaustive performance reports;
Key tables on topics at the end of each chapter to enable you to drill yourself on the core concepts about the official exam;
Interactive flashcards that are online-based to ensure you know how to apply the key concepts of each chapter;

Another vital book that takers for 300-425 test might wish to utilize is the Cisco Wireless Network Design Guide. This study guide by Shaun Hummel is available on Amazon and covers the basics of wireless design regarding Cisco networks. Simply put, it delves into an effective methodology that one can use to plan and design wireless networks. The book is best for reference purposes but it can be a great addition to your revision resources for the real validation, which scrutinizes wireless principles, techniques & technologies as well as acts as a practical guide for the purpose of designing networks. Included as well is a case study to assist in bringing out actual scenarios and strategies to address them. The readers can also make proper use of the chapter quizzes to evaluate themselves on how they are absorbing the content.

WLAN High Availability

The questions from this section cover 20% of the entire content and are dedicated to evaluating the following abilities of the candidates:

Design high availability for various controllers, including network availability through LAG, stateful switchover, as well as anchor controller priority & redundancy;
Design high availability for APs, including fall-back (primary, secondary, and assigning tertiary) and AP prioritization.

NEW QUESTION 59
What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?

A. 20%
B. 30%
C. 40%
D. 50%

Answer: A

Explanation:

NEW QUESTION 60
An engineer is designing a wireless network to support nigh availability. The network will need to support the total number of APs and client SSO. Live services should continue to work without interruption during the failover. Which two requirements need to be incorporated into the design to meet these needs? (Choose two)

A. WLC 7.5 code or more recent
B. 10 sec RTT
C. redundant vWLC
D. controller high availability pair with one of the WLCs having a valid AP count license
E. back-to-back direct connection between WLCs

Answer: D,E

NEW QUESTION 61
Multiple WLCs are implemented in a high-availability configuration in a mobility group. APs are deployed with only a primary controller assigned. By default, which mobility group member controller do the orphaned APs join in the event of a failed controller?

A. controller with the lowest percent of associated APs per license capacity
B. controller with the most available AP free license capacity
C. controller with the least CPU utilization over the last reporting period
D. controller with the least number of associated APs

Answer: D

Explanation:
Explanation
https://mrncciew.com/2013/04/07/ap-failover/

NEW QUESTION 62
A customer is concerned about mesh backhaul link security. Which level of encryption does the backhaul link use?

A. AES
B. WEP
C. 3DES
D. hash

Answer: A

Explanation:

NEW QUESTION 63
A company wants to replace its existing PBX system with a new VoIP System that will include wireless IP phones. The CIO has concerns about whether the company's existing wireless network can support the new system. Which tool in Cisco Prime can help ensure that the current network will support the new phone system?

A. Map Editor
B. Voice Readiness
C. Site Calibration
D. Location Readiness

Answer: B

NEW QUESTION 64
An enterprise has moved most services to the cloud, including email applications and real-time communication. Which feature must be enabled on the wireless network to improve the user experience?

A. radio management
B. fast secure roaming
C. interference mitigation
D. QoS

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/Enterprise-Mobility-8-5-Design-Guide/Enterprise_Mobility_8-5_Deployment_Guide.pdf

NEW QUESTION 65
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has 40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails. Which parameter needs to be in place to complete the configuration?

A. The primary Cisco WLC is already set as the secondary unit.
B. A cable in the RP port
C. The secondary Cisco WLC needs a minimum of 50 base licenses
D. SSO needs to be enabled

Answer: C

NEW QUESTION 66
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?

A. UDP 16666 for control plane, EoIP (IP protocol 97) for data plane
B. UDP 16668 for control plane, UDP 16667 for data plane
C. UDP 16666 for control plane, UDP 16667 for data plane
D. UDP 16667 for control plane, UDP 16666 for data plane

Answer: C

Explanation:

NEW QUESTION 67
An engineer at a global enterprise organization must ensure that a mesh deployment has the highest number of channels available to the backhaul, regardless of region deployed, which design meets this requirement?

A. redundant controllers in the most restrictive regulatory domain
B. redundant controllers in the least restrictive regulatory domain
C. one controller per country code
D. one controller per continent

Answer: A

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/country_codes.html

NEW QUESTION 68
A wireless engineer is designing a wireless network for a warehouse using access points with internal antennas. Which two elements have a negative effect on the wireless users? (Choose two.)

A. access point height
B. wireless channels
C. absorption
D. client authorization
E. client authentication

Answer: A,C

Explanation:
https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/design_guide_c07-693245.html#_Toc309331086

NEW QUESTION 69
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?

A. eping
B. ping
C. mping
D. rping

Answer: B

Explanation:

NEW QUESTION 70
The wireless learn must configure a new voice SSID for optimized roaming across multiple WLCs with Cisco 8821 phones Which two WLC settings accomplish this goal? (Choose two)

A. Use Cisco Centralized Key Management for authentication.
B. Configure AP groups between WLCs.
C. Configure mobility groups between WLCs
D. Use AVC to lag traffic voice traffic as best effort.
E. Configure AVC profiles on the SSlD

Answer: A,D

Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8821/english/adminguide/w88x_b_wireless-8821-8821ex-admin-guide/w88x_b_wireless-8821-8821ex-admin-guide_chapter_01.html

NEW QUESTION 71
An engineer must speed up the reauthentication delays that are being experienced on the wireless infrastructure by deploying a key-caching mechanism. Which mechanism must be configured?

A. PMF
B. FT
C. PEAP
D. GTK-randomization

Answer: B

Explanation:

NEW QUESTION 72
Multiple WLCs are implemented in a high-availability configuration in a mobility group. APs are deployed with only a primary controller assigned. By default, which mobility group member controller do the orphaned APs join in the event of a failed controller?

A. controller with the lowest percent of associated APs per license capacity
B. controller with the most available AP free license capacity
C. controller with the least CPU utilization over the last reporting period
D. controller with the least number of associated APs

Answer: D

Explanation:
Section: Mobility

NEW QUESTION 73
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?

A. Use enclosures to hide the wireless infrastructure in the surrounding environment.
B. Deploy environmentally friendly cabling components to blend into the environment.
C. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
D. Paint the access point to cover the LED from being noticeable.

Answer: B

Explanation:

NEW QUESTION 74
What is the Ethernet frame size for 802.1Q?

A. 0
B. 1
C. 2
D. 3

Answer: C

Explanation:
Explanation/Reference:

NEW QUESTION 75
What causes the most signal attenuation, based on the wireless design tools?

A. glass wall
B. cinder block wall
C. metal door
D. office window

Answer: C

Explanation:

NEW QUESTION 76
Which statement about AP failover priority for access points when configured with priority 1 or 4 is true?

A. When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure.
B. When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
C. When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure.
D. When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.

Answer: D

Explanation:

NEW QUESTION 77

A. Which action corrects the problem?
B. Configure a GRE tunnel between R1 and R3.
C. Lower the MSS on PC A.
D. Configure PMTUD on the network.
E. Configure QoS on the network.

Answer: A,C

Explanation:
Explanation/Reference:

NEW QUESTION 78
What causes the most signal attenuation, based on the wireless design tools?

A. glass wall
B. cinder block wall
C. metal door
D. office window

Answer: C

Explanation:

NEW QUESTION 79
Drag and drop the characteristics from the left onto the correct functionalities on the right.

Answer:

Explanation:

Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010100001.html

NEW QUESTION 80
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?

A. Use enclosures to hide the wireless infrastructure in the surrounding environment.
B. Deploy environmentally friendly cabling components to blend into the environment.
C. Use AIR-AP-BRACKET-1 to allow for greater mounting locations
D. Paint the access point to cover the LED from being noticeable.

Answer: B

Explanation:

NEW QUESTION 81
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)

A. lower data rates than laptops
B. higher data rates than laptops
C. no support for 802.11r
D. no support for 802.11ac
E. fewer antennas than laptops

Answer: B,E

Explanation:
Section: Wireless Site Survey

NEW QUESTION 82
Which non-Wi-Fi interferer can be identified by Metageek Chanalyzer?

A. smartphones
B. PDAs
C. jammers
D. printers

Answer: C

Explanation:
Explanation
https://www.metageek.com/training/resources/wifi-and-non-wifi-interference

NEW QUESTION 83
An engineer must speed up the reauthentication delays that are being experienced on the wireless infrastructure by deploying a key-caching mechanism. Which mechanism must be configured?