Veeam VMCE2021 Exam Info and Free Practice Test | ITPassLeader
Pass Veeam VMCE2021 Premium Files Test Engine pdf - Free Dumps Collection
NEW QUESTION 35
You use datastores as the source for your backup jobs. Some VM backups are consuming too much repository disk space. They have backup files created by multiple backup jobs. What could be the reason? (Choose two.)
- A. VM retention is set to do full backups more often than others in the job
- B. The VM is in a backup chain and trapped inside a single retention file
- C. The VMs were moved to different datastores manually
- D. Jobs are configured as per VM and these particular VM's need more fulls
- E. VMware Storage DRS (Distributed Resource Scheduler) moved VMs to different datastores
Answer: C,D
NEW QUESTION 36
Which of the following is an additional database restore option in the Veeam Explorer for Microsoft SQL?
- A. RECOVERY
- B. ACTIVE
- C. SIMPLE
- D. NORECOVERY
Answer: A
NEW QUESTION 37
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?
- A. If a VM within the replication job is not mapped, the job will fail
- B. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
- C. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
- D. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
Answer: B
NEW QUESTION 38
Which of the following is NOT an advantage of Veeam ONE Monitor?
- A. Manual or scheduled log analytics
- B. Updates are signature based
- C. Built in phone home function for better security
- D. Automatic problem mediation
Answer: C
NEW QUESTION 39
A customer currently has one backup job that runs every four hours to backup their VMs in a transaction consistent state. Which job configuration will keep all restore points safe in case the primary site and backups go down while still being able to do a point-in-time recovery of a SQL database from the backups on the second site?
- A. Configure a second VM backup job and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- B. Configure a backup copy job in pruning mode and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- C. Configure a backup copy job in mirror mode, to a repository on the second site
- D. Configure a backup copy job in pruning mode and have it copy data every day, starting at midnight, to a repository on the second site
Answer: C
Explanation:
Explanation
https://www.running-system.com/veeam-version-10-favorite-features-immediate-copy-mirroring/
NEW QUESTION 40
Select the correct description of a synthetic full backup.
- A. A synthetic full backup will generate a new VBK file by getting data from the hypervisor
- B. A synthetic full backup will update the existing VBK with data from the hypervisor and generate a new VRB file
- C. A synthetic full backup combines a VBK file with one or more VIB files from a repository to generate a new VBK file
- D. A synthetic full backup combines a VIB file with one or more VBK files from a repository to generate a new VBK file
Answer: A
NEW QUESTION 41
Sometimes snapshots are "lost" by vCenter. What tool finds and removes those lost snapshots?
- A. Snapshot Hunter
- B. CLI Snapshot Removal Tool
- C. Veeam ONE Orphaned VM Reporter
- D. Snapshot Extractor
Answer: A
NEW QUESTION 42
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?
- A. Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler
- B. In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM
- C. Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM
- D. In the virtual machines setting of the job, add a script in the scripts tab under "Run the following script before the job:"
Answer: B
NEW QUESTION 43
A company needs to maintain and verify backups at a secondary site to meet the following requirements: RTO of two hours, RPO of 12 hours, four weeks retention. Which of the following backup copy job configurations meets these requirements?
- A. Periodic backup copy job, scheduled for a two-hour interval, with 112 restore points to retain
- B. Periodic backup copy job, scheduled for a two-hour interval, with 56 restore points to retain
- C. Periodic backup copy job, scheduled for a 12-hour interval, with 56 restore points to retain
- D. Periodic backup copy job, scheduled for a 12-hour interval, with 112 restore points to retain
Answer: C
NEW QUESTION 44
A company has outgrown their current data center and plans to use the second data center as the new primary and needs to migrate their workloads. They are running VMware in both data centers. Which steps would allow this migration to occur without any data loss?
- A. 1. Replication job
2.Failover plan
3.Permanent failover - B. 1. Replication job
2.Failback
3.Commit failback - C. 1. Replication job
2.Planned failover
3.Permanent failover - D. 1. Backup job
2.Instant VM Recovery
3.Finalize the Instant VM Recovery
Answer: C
Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/planned_failover.html?ver=100
NEW QUESTION 45
Your company is using Veeam ONE to monitor VM performance in real time. An end user has called to complain about the performance of a VM and has asked you to investigate the cause of the issue. Where in Veeam ONE do you go to view real time VM metrics?
- A. In the monitor client under the infrastructure view
- B. In the reporter portal in the workspace tab, VM performance
- C. In the reporter portal in the dashboards tab, VM performance dashboard
- D. In the monitor client under the data protection view
Answer: A
NEW QUESTION 46
You fail back a VM replica to the original location. Which of the following requirements needs to be met to be able perform quick rollback during a failback of a replica?
- A. The VM replica must have access to the repository where the full backup of the VM resides
- B. The VM replica must be created with the "Use Changed Block Tracking data" option enabled
- C. Perform failback to VM within the same subnet
- D. Indexing must be enabled for the original VM
Answer: B
NEW QUESTION 47
Which of the following is required to enable tape parallel processing?
- A. Two tape jobs are processed at the same time.
- B. The tape library has multiple drives.
- C. The source repository for the tape job is a scale out backup repository.
- D. The tape drive has multiple tapes.
Answer: B
NEW QUESTION 48
Offloading backup files to the capacity tier of a scale out repository can be done automatically by leveraging what type of job?
- A. Backup Copy Job
- B. Offload Job
- C. Backup Job
- D. Archive Job
Answer: C
NEW QUESTION 49
A company has replicated their critical application VMs to a second data center in another region. Their key application includes two database VMs and three application VMs. For proper operation, the database VMs need to start before the application VMs. What needs to be configured in Veeam to prepare for a disaster recovery situation?
- A. Use a failover plan
- B. Use a planned failover
- C. Use Instant VM Recovery
- D. Use on-click failover
Answer: A
NEW QUESTION 50
Which of the following statements are true when comparing a synthetic full backup to an active full backup on an NTFS-based backup repository? Choose two options.
- A. If the backup repository performance is weak, creating synthetic full backups is the best choice.
- B. The synthetic full backup file has a .vsb extension, whereas the active full backup has a .vbk extension.
- C. Synthetic full backups impose less load on the production environment.
- D. Synthetic full backups consume more network bandwidth.
- E. In terms of content and retention, the synthetic full backup file is identical to an active full backup file.
- F. Synthetic full backups are always best when launched on a dedupe appliance.
Answer: C,E
NEW QUESTION 51
......
Updated Official licence for VMCE2021 Certified by VMCE2021 Dumps PDF: https://www.itpassleader.com/Veeam/VMCE2021-dumps-pass-exam.html
New 2021 Realistic VMCE2021 Dumps Test Engine Exam Questions in here: https://drive.google.com/open?id=1t3IpM2E_0PINrkl-Zf__UF8XF6uDkGet