[Jan 24, 2022] C_IBP_2105 PDF Recently Updated Questions Dumps to Improve Exam Score
C_IBP_2105 Dumps Full Questions with Free PDF Questions to Pass
SAP IBP Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books | Weighting |
|---|---|---|
| Supply and Response | Configure supply planning, run various solvers to generate planning results IBP100, IBP110, IBP200 (SAP IBP OD 2105), IBP700 (SAP IBP OD 2105) | > 12% |
| Analytics and Reporting | Define and view information with user-defined charts and dashboards. IBP200 (SAP IBP OD 2105), IBP300 (SAP IBP OD 2105) | < 8% |
| Inventory | Optimize inventory in the supply chain utilizing algorithms that derive inventory targets. IBP100 | < 8% |
| Demand Planning | Create statistical forecast using historical data with basic methods. IBP200 (SAP IBP OD 2105), IBP600 (SAP IBP OD 2105) | 8% - 12% |
| Key Figures & Attributes | Create and use key figures and attributes. IBP200 (SAP IBP OD 2105), IBP300 (SAP IBP OD 2105) | > 12% |
| General Configuration of a Planning Area | Display, create, copy, edit, check, and activate a planning area. IBP200 (SAP IBP OD 2105) | > 12% |
| Solution Architecture | Describe the benefits of implementing SAP's Integrated Business Planning solution. IBP100, IBP200 (SAP IBP OD 2105), IBP300 (SAP IBP OD 2105) | < 8% |
| Planning Operators & Application Jobs | Use Planning Operators. IBP300 (SAP IBP OD 2105) | > 12% |
| User Interface | Use the Fiori Launchpad to customize the UI, work with Excel UI IBP200 (SAP IBP OD 2105) | > 12% |
| S&OP Review | Describe how IBP extends the logic of S&OP in the network using advanced demand and supply planning integrated with financial plans. IBP200 (SAP IBP OD 2105) | < 8% |
NEW QUESTION 39
You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.
What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.
- A. Selecting by attribute with option 'contain' is possible.
- B. Specifying source key figure is mandatory.
- C. Specifying target key figure is mandatory.
- D. Specifying target key figure that is time independent is possible.
Answer: B,C
NEW QUESTION 40
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.
- A. Loc-Prod Subst Valid-From Date
- B. Flag 'Disable Substitution of Location Products'
- C. Promotion duration
- D. Location Product Sub Cost Rate
Answer: A,C
NEW QUESTION 41
When can filter blocks appear in calculations? Note: There are 2 correct Answers to this question.
- A. When modeling attribute transformations
- B. When modeling cross-period calculations
- C. When using IFISNULL statements in the formula
- D. When modeling attribute as a key figure
Answer: A,B
NEW QUESTION 42
You are using the Resource Location master data type. How do you specify capacity supply as time- dependent?
- A. Set the Capacity Supply Time Series indicator in the Resource Location master data type.
- B. Set the Capacity Supply additional attribute in the time profile.
- C. Maintain the CAPASUPPLY key figure values in the planning area.
- D. Set the Capacity Supply Time Series indicator attribute as a key.
Answer: A
NEW QUESTION 43
You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to? Note: There are 2 correct Answers to this question.
- A. Planning view templates in the SAP IBP add-in for Microsoft Excel
- B. Snapshot operator in the SAP IBP add-in for Microsoft Excel
- C. Jobs in the Applications Jobs app
- D. Supply chain graph in Supply Chain Network app
Answer: A,C
NEW QUESTION 44
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.
- A. Change the past and future horizon of the levels in the time profile.
- B. Add a new time profile level to the time profile.
- C. Change the description of the attributes in the time profile.
- D. Remove an attribute assigned to the time profile level if the attribute is used in a planning level.
Answer: A,C
NEW QUESTION 45
The Analytics Advanced app allows you to work with different types of charts. What can be the origin of the charts you can work with?
- A. Process Templates
- B. Custom Alerts
- C. Dashboards Advanced
- D. SAP IBP VBA Add-in template
Answer: D
NEW QUESTION 46
Which supply chain challenge is addressed by SAP IBP for demand?
- A. Inability to synchronize supply and demand
- B. Inability to respond to short-term changes in supply and demand
- C. Inability to understand and shape actual demand
- D. Inability to arrive at consensus demand
Answer: C
NEW QUESTION 47
What differentiates the Create New (Simple copy) and the Create New with Dependencies (Advanced copy) functions of a planning area? Note: There are 2 correct Answers to this question.
- A. The planning view favorites are only copied when you use the Advanced copy.
- B. Master data is only shared between the original and the new planning area when you use the Create New (Simple copy) function.
- C. A copy of the time profile is only created when you use the Create New with Dependencies (Advanced copy) function.
- D. Associated attributes are only shared between the original and the new planning area when you use the Create New (Simple copy) function.
Answer: B,C
NEW QUESTION 48
You want to display and edit data in different units of measure (UOM). Which of the following must you consider before you use UOM? Note: There are 3 correct Answers to this question.
- A. Analytics provide the user with the option to select the target unit of measure.
- B. Units of measure are usually not time-dependent.
- C. Unit of measure is an attribute of a master data type, such as Product.
- D. Units of measure are usually not time-independent.
- E. Conversion to the target unit of measure is handled by functionality of SAP IBP Excel UI
Answer: A,B,C
NEW QUESTION 49
Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.
- A. Target inventory level
- B. Lead time variability
- C. Lot sizes
- D. Reorder point
Answer: B,C
NEW QUESTION 50
Which of the following conditions are relevant for subtotals in the planning view? Note: There are 2 correct Answers to this question.
- A. The total value can be added before or after the selected attribute.
- B. The values of the attribute-based total at the highest attribute level in the planning level can be changed.
- C. The total number of attributes that can use subtotals in the planning view can be restricted.
- D. Only attribute-based totals can be added to the planning view.
Answer: A,C
NEW QUESTION 51
What are S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments. Additional tiering costs (default). Target inventory violation cost
- B. Number of fair share segments. Maximum inventory. Additional tiering costs (default)
- C. Number of fair share segments. Maximum days of coverage. Number of fair share segments late delivery
- D. Number of fair share segments. Additional tiering costs (default). Number of fair share segments late delivery
Answer: D
NEW QUESTION 52
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using local member
- B. Using attribute as a key figure
- C. Using key figure calculation
- D. Using aggregation mode average
Answer: D
NEW QUESTION 53
Analytics charts are created by the user in the Advanced Analytics application. What actions are possible in the Advanced Analytics app? Note: There are 2 correct Answers to this question.
- A. Group data.
- B. Open graphics in Excel.
- C. Merge charts together.
- D. Apply filters on your data.
Answer: A,D
NEW QUESTION 54
Where can we see the results of Time Series analysis in SAP IBP?
- A. Time Series Property Attribute in Customer
- B. Time Series Property Attribute in Customer Product
- C. Time Series Property Attribute in Customer Source
- D. Time Series Property Attribute in Product
Answer: D
NEW QUESTION 55
Which conditions are prerequisites for key figure disaggregation?
- A. The key figure is calculated and editable.
- B. The key figure is set to Not Editable.
- C. The key figure is stored and editable.
- D. The key figure is calculated and aggregation mode is selected.
Answer: C
NEW QUESTION 56
Which header name displays are available in the Report Options menu of the SAP IBP Excel interface?
Note: There are 2 correct Answers to this question.
- A. Changed member names that the user had created
- B. Business meaning, as defined in configuration
- C. Full unique name including the dimension and technical name
- D. Caption, as defined in configuration for the default name
Answer: B,C
NEW QUESTION 57
Which of the following are functions of SAP IBP for demand? Note: There are 3 correct Answers to this question.
- A. Detailed statistical analysis of demand data using the supply chain algorithm library
- B. Demand sensing of demand data using predictive analytics tools
- C. Detailed statistical analysis of demand data using predictive analytics tools
- D. Demand sensing of demand data using the supply chain algorithm library
- E. Embedded, on-the-fly demand analytics
Answer: C,D,E
NEW QUESTION 58
How can you make charts and dashboards private?
- A. Enable the relevant settings in the global configuration parameters.
- B. Enable the relevant settings in the Analytics Advanced and Dashboards Advanced applications.
- C. Choose only relevant key figures and filters in the Analytics Advanced application.
- D. Set restrictions for charts in the Permission filter application.
Answer: A
NEW QUESTION 59
You are working to realign the data due to a recent warehouse closure. What should you be aware of in regards to configuration of realignment steps? Note: There are 2 correct Answers to this question.
- A. If a realignment step fails, subsequent steps are not processed.
- B. The realignment step status must be set to Approved for it to be executed.
- C. The name of the realignment step should be no longer than 20 characters.
- D. The number of steps in realignment run is limited to 255.
Answer: A,B
NEW QUESTION 60
......
C_IBP_2105 Exam Certification Details:
| Level: | Associate |
| Languages: | English |
| Cut Score: | 64% |
| Sample Questions: | SAP C_IBP_2105 Exam Sample Question |
| Duration: | 180 mins |
| Exam: | 80 questions |
100% Updated SAP C_IBP_2105 Enterprise PDF Dumps: https://www.itpassleader.com/SAP/C_IBP_2105-dumps-pass-exam.html