Latest Cisco 300-710 Practice Test Questions, Securing Networks with Cisco Firepower Exam Dumps [Q81-Q97]

Share

Latest Cisco 300-710 Practice Test Questions, Securing Networks with Cisco Firepower Exam Dumps

Mar-2024 Pass Cisco 300-710 Exam in First Attempt Easily


Cisco 300-710 exam covers a wide range of topics related to network security, including network security concepts, threat defense, and VPN technologies. 300-710 exam also covers advanced topics such as network access control, security intelligence, and advanced malware protection. 300-710 exam is designed to test the candidate's understanding of network security concepts and their ability to apply these concepts to real-world scenarios.


Passing the Cisco 300-710 exam is an excellent way for professionals to demonstrate their expertise in network security and their ability to implement effective security solutions using Cisco Firepower. Securing Networks with Cisco Firepower certification also provides a competitive edge in the job market, as it is highly valued by employers. Candidates who pass the exam will receive the Cisco Certified Network Professional Security (CCNP Security) certification, which is recognized worldwide as a mark of excellence in network security.


Career Prospects and Salary Outlook

Clearing the Cisco 300-710 exam can elevate your career to a new level by enhancing your knowledge and skills, increasing your credibility, and providing you with a competitive edge over your peers. After passing this test and obtaining Cisco Certified Specialist – Network Security Firepower or CCNP Security, you will explore a variety of employment opportunities. The positions that will become available to you after getting certified are as follows:

  • Development Operations (DevOps) Engineer
  • Network Administrator
  • Network Manager
  • Systems Engineer

Passing the Cisco 300-710 exam can be also highly beneficial in terms of higher remuneration. According to PayScale, the average annual salary for the certificate holders amounts to $112,674. Depending on the role, you can earn even more than this figure. Thus, the average income of a Network Manager is around $131,000 per annum, while the position of a Senior Technical Consultant can bring you as much as $140,000 per year.

 

NEW QUESTION # 81
When deploying a Cisco ASA Firepower module, an organization wants to evaluate the contents of the traffic without affecting the network. It is currently configured to have more than one instance of the same device on the physical appliance Which deployment mode meets the needs of the organization?

  • A. inline tap monitor-only mode
  • B. passive tap monitor-only mode
  • C. inline mode
  • D. passive monitor-only mode

Answer: D


NEW QUESTION # 82
An engineer is configuring a Cisco IPS to protect the network and wants to test a policy before deploying it. A copy of each incoming packet needs to be monitored while traffic flow remains constant. Which IPS mode should be implemented to meet these requirements?

  • A. Inline tap
  • B. transparent
  • C. passive
  • D. routed

Answer: A


NEW QUESTION # 83
Which limitation applies to Cisco FMC dashboards in a multi-domain environment?

  • A. Child domains are able to view but not edit dashboards that originate from an ancestor domain.
  • B. Child domains are not able to view dashboards that originate from an ancestor domain.
  • C. Only the administrator of the top ancestor domain is able to view dashboards.
  • D. Child domains have access to only a limited set of widgets from ancestor domains.

Answer: B

Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Using_Dashboards.html


NEW QUESTION # 84
Which object type supports object overrides?

  • A. network object
  • B. time range
  • C. security group tag
  • D. DNS server group

Answer: A

Explanation:
Section: Configuration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Reusable_Objects.html#concept_8BFE8B9A83D742D9B647A74F7AD50053


NEW QUESTION # 85
Which feature is supported by IRB on Cisco FTD devices?

  • A. high-availability cluster
  • B. EtherChannel interface
  • C. redundant interface
  • D. dynamic routing protocol

Answer: D


NEW QUESTION # 86
Refer to the exhibit An engineer is modifying an access control pokey to add a rule to inspect all DNS traffic that passes through the firewall After making the change and deploying the pokey they see that DNS traffic is not bang inspected by the Snort engine What is the problem?

  • A. The rule must specify the security zone that originates the traffic
  • B. The rule must define the source network for inspection as well as the port
  • C. The action of the rule is set to trust instead of allow.
  • D. The rule is configured with the wrong setting for the source port

Answer: C


NEW QUESTION # 87
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)

  • A. ECMP with up to three equal cost paths across a single interface
  • B. BGPv6
  • C. ECMP with up to three equal cost paths across multiple interfaces
  • D. BGPv4 with nonstop forwarding
  • E. BGPv4 in transparent firewall mode

Answer: A,B


NEW QUESTION # 88
Refer to the exhibit.

What must be done to fix access to this website while preventing the same communication to all other websites?

  • A. Create an intrusion policy rule to have Snort allow port 80 to only 172.1.1 50.
  • B. Create an access control policy rule to allow port 443 to only 172.1.1 50
  • C. Create an access control policy rule to allow port 80 to only 172.1.1 50.
  • D. Create an intrusion policy rule to have Snort allow port 443 to only 172.1.1.50

Answer: C


NEW QUESTION # 89
A network administrator registered a new FTD to an existing FMC. The administrator cannot place the FTD in transparent mode. Which action enables transparent mode?

  • A. Add a Bridge Group Interface to the FTD before transparent mode is configured.
  • B. Obtain an FTD model that supports transparent mode.
  • C. Assign an IP address to two physical interfaces.
  • D. Dereglster the FTD device from FMC and configure transparent mode via the CLI.

Answer: D


NEW QUESTION # 90
What is the result of specifying of QoS rule that has a rate limit that is greater than the maximum throughput of an interface?

  • A. The system repeatedly generates warnings.
  • B. The rate-limiting rule is disabled.
  • C. Matching traffic is not rate limited.
  • D. The system rate-limits all traffic.

Answer: C

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/quality_of_service_qos.pdf


NEW QUESTION # 91
A hospital network needs to upgrade their Cisco FMC managed devices and needs to ensure that a disaster recovery process is in place. What must be done in order to minimize downtime on the network?

  • A. Configure the Cisco FMCs for failover
  • B. Configure the Cisco FMC managed devices for clustering.
  • C. Keep a copy of the current configuration to use as backup
  • D. Configure a second circuit to an ISP for added redundancy

Answer: A


NEW QUESTION # 92
What is an advantage of adding multiple inline interface pairs to the same inline interface set when deploying an asynchronous routing configuration?

  • A. Allows traffic inspection to continue without interruption during the Snort process restart.
  • B. Allows the IPS to identify inbound and outbound traffic as part of the same traffic flow.
  • C. The interfaces disable autonegotiation and interface speed is hard coded set to 1000 Mbps.
  • D. The interfaces are automatically configured as a media-independent interface crossover.

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config-guide-v601/fpmc-config-guide-v60_chapter_01011010.pdf


NEW QUESTION # 93
A network administrator needs to create a policy on Cisco Firepower to fast-path traffic to avoid Layer 7 inspection. The rate at which traffic is inspected must be optimized. What must be done to achieve this goal?

  • A. Configure a prefilter policy.
  • B. Enable lhe FXOS for multi-instance.
  • C. Disable TCP inspection.
  • D. Configure modular policy framework.

Answer: A


NEW QUESTION # 94
An administrator is creating interface objects to better segment their network but is having trouble adding interfaces to the objects. What is the reason for this failure?

  • A. The interfaces are being used for NAT for multiple networks.
  • B. The interfaces belong to multiple interface groups.
  • C. The administrator is adding interfaces of multiple types.
  • D. The administrator is adding an interface that is in multiple zones.

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/reusable_objects.html#ID-2243-000009b4
"All interfaces in an interface object must be of the same type: all inline, passive, switched, routed, or ASA FirePOWER. After you create an interface object, you cannot change the type of interfaces it contains."


NEW QUESTION # 95
What is the role of the casebook feature in Cisco Threat Response?

  • A. pulling data via the browser extension
  • B. triage automaton with alerting
  • C. sharing threat analysts
  • D. alert prioritization

Answer: C

Explanation:
The casebook and pivot menu are widgets available in Cisco Threat Response. Casebook - It is used to record, organize, and share sets of observables of interest primarily during an investigation and threat analysis. You can use a casebook to get the current verdicts or dispositions on the observables.
https://www.cisco.com/c/en/us/td/docs/security/ces/user_guide/esa_user_guide_13-5-1/b_ESA_Admin_Guide_ces_13-5-1/b_ESA_Admin_Guide_13-0_chapter_0110001.pdf


NEW QUESTION # 96
Which command-line mode is supported from the Cisco Firepower Management Center CLI?

  • A. admin
  • B. privileged
  • C. configuration
  • D. user

Answer: C

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/660/configuration/guide/fpmc-config-guide-v66/command_line_reference.pdf


NEW QUESTION # 97
......

Free 300-710 Exam Files Downloaded Instantly 100% Dumps & Practice Exam: https://www.itpassleader.com/Cisco/300-710-dumps-pass-exam.html

Updated Verified 300-710 dumps Q&As - 100% Pass Guaranteed: https://drive.google.com/open?id=12Omz5jVAk99qRmmEwFGnO3NuSBDRRsFb

0
0
0
0