Latest NCP-MCI-5.20 Exam Dumps Nutanix Exam from Training Expert ITPassLeader
Pass Nutanix Nutanix Certified Professional - Multi cloud Infrastructure PDF Dumps | Recently Updated 282 Questions
NEW QUESTION 82
Async DR is configured between two sites. A network outage occurs at the primary site.
Which steps must the administrator perform to bring the VMs back into service at the backup site?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.
Answer:
Explanation:
NEW QUESTION 83
An administrator is restarting a node and the CVM has not automatically restarted.
Which command should be used to start the CVM?
- A. virsh start block-ID-(Node Letter)
- B. virsh start cvm name
- C. cvm start cvm_name
- D. cvm start block-ID-(Node Letter)
Answer: B
NEW QUESTION 84
An administrator has a cluster in a secure environment. The administrator wants to disable password authentication over SSH to access the cluster.
Which configure should the administrator use to disable password authentication over SSH?
- A. Enable Cluster Lockdown in Prism
- B. Modify the SSH configuration on each host
- C. Configure a proxy server in Prism
- D. Modify the SSH Configuration on each CVM
Answer: A
NEW QUESTION 85
In an AHV cluster, an administrator needs to enable an application to share a disk b group but needs to enable the VMs to see the volume group.
How should the administrator accomplish this task?
- A. Add a disk to one VM and enable read/write on it from the other VM.
- B. Create a shared folder for the VMs using Nutanix Files.
- C. Configure a virtual disk on each VM with identical attributes in the storage dashboard.
- D. Add the volume group to the VM using the update link from the VM dashboard.
Answer: D
NEW QUESTION 86
An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.
What are two impacts on the cluster? (Choose two)
- A. Increasing CPU counts will decrease memory utilization
- B. Increase CPU ready%
- C. Increase memory utilization%
- D. Increase CPU utilization%
Answer: A,C
NEW QUESTION 87
A configuration is single domain, single forest, and does not use SSL.
Which port number should be used to configure LDAP?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 88
When a VM is restarted on a new host during an HA event, how is the I/O data path impacted?
- A. All write I/O occurs on the new host. When reading old data, the I/O may be forwarded by the local CVM to the remote CVM.
- B. All I/O continues to be served from the host the VM previously resided on.
- C. All write I/O occurs on the new host. When reading old data, the I/O is served from the host the VM previously resided on.
- D. All data and I/O associated with the VM are migrated to the new host.
Answer: C
NEW QUESTION 89
On nutanix cluster in which distribution is open ldap authentication management system.?
- A. Ubuntu
- B. Red Hat
- C. Suse
- D. CentOS
Answer: D
Explanation:
* OpenLDAP: OpenLDAP is a free, open source directory service, which uses the Lightweight Directory Access Protocol (LDAP). developed by the OpenLDAP project. Nutanix currently supports the OpenLDAP 2.4 release running on CentOS distributions only.
NEW QUESTION 90
A guest VM should be able to tolerate simultaneous failure of two nodes or drives.
What are the minimum requirements for the Nutanix cluster?
- A. 5 nodes with cluster RF 2 and container RF 3
- B. 5 nodes with cluster RF 3 and container RF 3
- C. 3 nodes with cluster RF 3 and container RF 3
- D. 3 nodes with cluster RF 3 and container RF 2
Answer: B
NEW QUESTION 91
what command is used to run the nutanix cluster checks from the CVM CLI?
- A. ncc health_check run_all
- B. ncc check_all health_options
- C. ncc check_health run_all
- D. ncc run_all_health_check
Answer: A
NEW QUESTION 92
Which three cluster operations require an administrator to reclaim licenses?(Choose three)
- A. Destroy a cluster.
- B. Move Nodes between clusters.
- C. Migrate a cluster
- D. Upgrade a cluster
- E. Remove a Node from a cluster
Answer: A,B,E
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Web_Console_Guide-Prism_v4_7:lic_licensing_managing_c.html Reclaiming Licenses (Including License Renewal) You can reclaim and optionally re-apply licenses for nodes in your clusters:
You must reclaim licenses when you plan to destroy a cluster. First reclaim the licenses, then destroy the cluster. You do not need to reclaim Starter licenses. These licenses are automatically applied whenever you create a cluster, including after you have destroyed a cluster.
Return licenses to your inventory when you remove one or more nodes from a cluster. Also, if you move nodes from one cluster to another, first reclaim the licenses, move the nodes, then re-apply the licenses.
You can reclaim licenses for nodes in your clusters in cases where you want to make modifications or downgrade licenses. For example, applying an Ultimate license to all nodes in a cluster where some nodes are currently licensed as Pro and some nodes are licensed as Ultimate. You might also want to transition nodes from Ultimate to Pro licensing.
You must reclaim licenses when you renew licenses. First reclaim the expired licenses, then apply new licenses.
NEW QUESTION 93
Which configuration should an administrator make in Prism to receive a summary of the alerts every 24 hours?
- A. SNMP
- B. Email Digest
- C. Individual Alerts
- D. Syslog
Answer: B
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Prism_Central_Guide-Acr_v4_6:mul_alerts_management_pc_c.html Prism Central allows you to configure the alert messages sent by Prism Central. To configure alert settings, reporting rules, and message templates, do the following:
Note: Alert emails sent by Prism Central are in addition to any alert emails you might have configured on individual clusters through the Prism web console. You will receive email from both entities in this case. Prism Central alert emailing is not enabled by default; you must explicitly enable it and specify the recipients (Nutanix customer support and/or supplied email addresses).
Do one of the following:
In the gear icon pull-down list of the main menu, select Alert Email Configuration.
In the Alerts dashboard, click the Email Configuration button.
The Alert Email Configuration window appears.
Click the Settings tab and do the following:
Enable Prism Central to sent alert emails.
Check the Email Every Alert box to send an email whenever the event occurs.
Check the Email Daily Digest box to send a cumulative (24 hour) list of alerts once a day.
You can check one or both boxes. If neither box is checked, no alert emails are sent by Prism Central.
Check the Nutanix Support box to send alert notification to Nutanix customer support.
To send alert notifications to others, enter their email addresses in a comma separate list in the field below the Nutanix Support box.
Click the Apply button to apply the changes and continue the configuration (or click the Save button to apply the changes and close the window).
The Connection Status section displays mail transport status information. In this example, an SMTP server is configured for mail service. Clicking the Details link opens the SMTP server settings window
NEW QUESTION 94
A Nutanix administrator receives a request from the networking team to start SNMP Traps to their central reporting solution. The administrator creates the transport. The central monitoring tool is not able to clearly read the SNMP traps that are being sent.
What does the administrator need to provide to read SNMP traps correctly?
- A. SNMP Trap Port
- B. Nutanix MIB file.
- C. Cluster Virtual IP address
- D. TCP/IP address
Answer: B
NEW QUESTION 95
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which two methods can be used to anonymize the log data sent to Nutanix Support? (Choose two.)
- A. Run the ncc log_collector tool on a CVM, setting the - enhanced log collector flag to true,
- B. Run the ncc log_collector tool on a CVM, setting the -anonymize_output flag to true
- C. On the Health dashboard in Prism, use the Collect Logs option under Actions and choose Anonymize Output
- D. Under the User Profile in Prism, select Anonymize Log Output then run Log Collector from the Health dashboard.
Answer: B,C
NEW QUESTION 96
Which bond mode is the default mode on an AHV Nutanix cluster?
- A. Balance TCP
- B. Active - Backup
- C. Balanced SLB
- D. Link Aggregation
Answer: B
NEW QUESTION 97
An administrator needs to bring down a host in a Nutanix Cluster for maintenance reasons. The administrator puts the host in maintenance mode.
What should the administrator do to perform an orderly shutdown of the CVM?
- A. Enter Fewer off Server-orderly Shutdown from the IPMI console.
- B. Enter Fever off Server - immediate from the IPMI console.
- C. Execute the cvm_shutdown -P now command from the host.
- D. Execute the cvm_shutdown -P new command from the CVM.
Answer: C
NEW QUESTION 98
Which algorithm do snapshots and clones leverage to maximize efficiency and effectiveness?
- A. Redirect-On-Write
- B. Split-mirror
- C. Continuous Data Protection
- D. Copy-on-Write
Answer: A
NEW QUESTION 99
What is the function of the virbr0 bridge on AHV?
- A. To carry storage communication between the guest VMs and the CVM
- B. To carry management and storage communication between user VMs and the CVM.
- C. To carry management and storage communication between user VMs and AHV host.
- D. To carry all traffic between the user VMs and the upstream network.
Answer: C
Explanation:
http://www.vstellar.com/2019/01/10/ahv-networking-part-1-basics/#:~:text=AHV%20Network%20Architecture&text=virbr0%20is%20an%20internal%20switch,virbr0)%20have%20IP%20address%20192.168.
NEW QUESTION 100
An administrator needs to replace the default self-signed certificate in Prism with a certificate signed by a trusted Certificate Authority (CA).
Which option on the task menu should the administrator select to change this configuration?
- A. SSL Certificate
- B. Cluster Lockdown
- C. Lifecycle Management
- D. UI Options
Answer: A
NEW QUESTION 101
......
Nutanix NCP-MCI-5.20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
Updated Test Engine to Practice NCP-MCI-5.20 Dumps & Practice Exam: https://www.itpassleader.com/Nutanix/NCP-MCI-5.20-dumps-pass-exam.html
Dumps Collection NCP-MCI-5.20 Test Engine Dumps Training With 282 Questions: https://drive.google.com/open?id=1-0D8uFBiopQVIlStvOWnayrw9vZ6gHSN