Master 2021 Latest The Questions Nutanix SE Academy and Pass NCSC-Level-1 Real Exam!
Penetration testers simulate NCSC-Level-1 exam PDF
NEW QUESTION 12
After a consultant runs Foundation, the imaging process fails.
In which two locations can the consultant find the logs? (Choose two.)
- A. On the Foundation VM - /home/nutanix/foundation/logs
- B. On the Hypervisor - /home/nutanix/foundation/logs
- C. Logs link on the Foundation Imaging Screen
- D. On the CVM - /home/Nutanix/foundation/logs
Answer: A,C
NEW QUESTION 13
During a technical call with a customer, it is identified that this installation will be software only on Dell servers. The out-of-band management interfaces will not be given IP addresses until the consultant is onsite.
Which Foundation method should be used for this type of installation?
- A. Bare metal using LAN MAC addresses.
- B. Bare metal using iDRAC MAC addresses.
- C. Bare metal using node serial numbers.
- D. Bare metal using block serial numbers.
Answer: B
NEW QUESTION 14
Where can a consultant find Nutanix Enablement Starter Packs (ESPs)?
- A. In the Services section of the Nutanix website.
- B. In the Support Portal
- C. In the Partner Portal
- D. In the Nutanix .NEXT Community Forum
Answer: C
NEW QUESTION 15
What is the minimum number of nodes required for a Nutanix Cluster to support Replication Factor 3 (RF3) on a storage container?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 16
Which Nutanix feature creation is described in the Knowledge Transfer?
- A. Self Service Portal
- B. Calm Blueprints
- C. REST API
- D. Data Protection Domain
Answer: D
NEW QUESTION 17
A customer wants to use NIC teaming on an ESXi host using a vSphere Standard Switch configured with the Route based on physical NIC load load balancing option. The customer does not see the option when editing the Teaming and Failover settings for the switch.
How should the consultant resolve this issue?
- A. Add a vSphere Distributed Switch
- B. Install a vCenter server to manage the switch
- C. Add another physical NIC to the team.
- D. Change the load balancing option on the switch.
Answer: A
NEW QUESTION 18
A consultant runs the Foundation Applet and discovers all the nodes. The consultant wants to use the latest version of Foundation for imaging for support purposes and to cover the latest hardware and software hypervisor support.
What should the consultant do to upgrade Foundation on a node?
- A. Use crash cart and manually upgrade Foundation files on one node.
- B. Use the Foundation VM to upgrade Foundation on all nodes.
- C. Use the Foundation Applet to upgrade Foundation on a single node.
- D. Use latest version of Foundation to reimage all the nodes.
Answer: C
NEW QUESTION 19
A consultant needs to review a customer's switch port configuration to identify any issues. Other customer requirements are as follows:
* Leverage LACP
* Native VLAN will not be used
* Use Multiple Upstream switches
* Use VLANs 20-25 and 30
* LACP Fallback has been Enabled
* vPC or MLAG has been configured
What must be included in a configuration in order to meet these requirements?
- A. Native VLAN set to 30
Ports in access mode to allow all necessary VLANs - B. Native VLAN set to default
Ports trucked to allow all necessary VLANs - C. Native VLAN set to 30
Ports Trunked to allow all necessary VLANs - D. Native VLAN set to default
Ports in access mode to allow all necessary VLANs
Answer: B
NEW QUESTION 20
What reference materials should be provided to the customer during the Knowledge Transfer?
- A. As-Built Guide, technical slides and checklist, Network Diagram
- B. As-Built Guide, Project Plan, links to documentation and resources
- C. As-Built Guide, technical slides and checklist, links to documentation and resources
- D. Questionnaire, technical slides and checklist, links to documentation and resources
Answer: C
NEW QUESTION 21
A customer is deploying Nutanix AHV clusters over hundreds of remote sites worldwide. Prism Central will be used to centrally manage all clusters. Customer security policy requires the use of MS Active Directory (AD).groups to authenticate all network devices.
Which method should be consultant use to meet the requirements?
- A. Integrate AD authentication on Prism Central Only.
- B. Integrate AD authentication on all Prism Element Clusters.
- C. Proxy Prism Element traffic through Prism Central.
- D. Integrate AD authentication on all CVMs.
Answer: A
NEW QUESTION 22
A customer has a G6 AHV cluster with 4x10GbE NICs on each node and the following configuration:
* Networking is set to default
* Only two NICs are connected
The customer receives the following critical message:
The NIC is disconnected from the switch, or the switchport is failing.
What should the consultant verify to resolve the issue?
- A. The NICs are connected for balance-slb.
- B. The VLANs are configured correctly on the switch or tagged on the cluster.
- C. The other two 10GbE connections are removed from the default bond.
- D. The NICs are configured for active-backup.
Answer: D
NEW QUESTION 23
A consultant is deploying a two-node cluster at a remote branch office.
Which component must be available to complete cluster configuration?
- A. Prism Central
- B. Protection Domain
- C. Remote Site
- D. Witness VM
Answer: D
NEW QUESTION 24
A consultant is imaging a Nutanix cluster with VMware ESXi. Foundation returns an error that the media is not a supported ISO. The consultant checks the whitelist file in Foundation and confirms that the version of the ISO is not listed.
Which three actions should the consultant take to resolve this issue? (Choose three.)
- A. Restart the imaging process in Foundation.
- B. Obtain the MD5 checksum of the ISO and confirm MD5 checksum of ISO is listed.
- C. Edit the whitelist file in Foundation.
- D. Replace and save whitelist file in Foundation
- E. Download the iso_whitelist.json from the Support portal.
Answer: B,D,E
NEW QUESTION 25
During the Knowledge Transfer, the customer askes where to find the details about their Nutanix environment, such as IP addresses, storage containers, and configuration.
Where can the consultant find this information?
- A. Test Plan
- B. As-Built Guide
- C. Tech Checklist
- D. Support Portal
Answer: B
NEW QUESTION 26
Refer to the exhibit.
A system administrator is using Range-Autofill tool to assign IP addresses to setup a multi-block cluster based on the following configuration:
Which additional changes must be made during the Foundation process to configure the cluster correctly?
- A. Change IP address
- B. Change host names
- C. Reorder block serial
- D. Reorder blocks
Answer: B
NEW QUESTION 27
A consultant successfully installs the Foundation VM on a laptop and needs to ensure the VM can communicate externally.
Which two configuration changes should the consultant make next? (Choose two.)
- A. Open terminal and configure via ifconfig command.
- B. Configure the static IP address through the desktop virtualization software.
- C. Ensure the vNIC is set to bridged adapter.
- D. Run the set_foundation_ip_address application on the VM desktop.
Answer: C,D
NEW QUESTION 28
A consultant notices while assigning VLAN tags to hosts and CVMs in a running cluster, that Prism Element displays alerts indicating a node is down.
What should the consultant do to prevent these alerts?
- A. Restart the Nutanix cluster.
- B. Only change the Controller Virtual Machine VLANs.
- C. Stop the Nutanix cluster before changing VLANs.
- D. Only change the hypervisor VLANs.
Answer: C
NEW QUESTION 29
A consultant creates a Nutanix cluster using the 10.10.10.0/24 network and VLAN 10. The customer creates a VM network inside the Prism using VLAN 20. The customer starts to create VMs but is unable to ping the default gateway from these new systems.
What is causing the issue?
- A. Only one VLAN is supported on AHV.
- B. The CVM/hypervisor must be on an untagged VLAN.
- C. The switch port is not set up as a trunk.
- D. The CVM/hypervisor cannot use the same VLAN as guest VMs.
Answer: C
NEW QUESTION 30
A consultant is using a customer's switch for installation. Although the 10GbE ports for each of the hosts are connected to the switch, the nodes fail to be discovered.
What is causing the issue?
- A. Foundation VM is running on a Windows host.
- B. IPv6 is not enabled on the switch.
- C. IPMI port is not plugged in.
- D. 10GbE ports are configured with the incorrect duplex setting.
Answer: B
NEW QUESTION 31
A customer would like to re-image an existing cluster. The Foundation Applet and Foundation VM is unavailable to them.
How can the consultant access Foundation-as-a-Service (FaaS)?
- A. Through <CVM-IP> :9443
- B. Through <cluster-IP> :8000
- C. Through <cluster-IP> :9443
- D. Through <CVM-IP> :8000
Answer: D
NEW QUESTION 32
A consultant is performing a Nutanix Cluster installation on Dell XC Core hardware. The consultant decides to use Foundation Portable for Mac to perform the installation. When the consultant arrives onsite, Foundation Portable is unable to locate the new nodes.
Which log should the consultant check to troubleshoot this issue?
- A. ~/data/logs/foundation.out
- B. foundation.app/contents/resouces/log
- C. /home/nutanix/foundation/log
- D. ~/data/logs/foundation
Answer: C
NEW QUESTION 33
A consultant needs to verify the make and model of the systems that will be imaged with Foundation. The consultant does not have the Bill of Materials (BOM) available to review.
When should the consultant verify the make and model to prepare for the cluster deployment?
- A. Upon arriving on-site
- B. During the Foundation Process
- C. While conducting the Tech Review Call
- D. When reviewing the Statement of Work (SOW)
Answer: B
NEW QUESTION 34
A consultant has deployed a new Nutanix AHV cluster with Foundation. The customer requests separating the management and production traffic in the CVM.
Which feature should the consultant configure?
- A. Network Segmentation
- B. Micro-segmentation
- C. Multi-homing
- D. VLAN Tagging
Answer: C
NEW QUESTION 35
During the Foundation imaging process, nodes are successfully imaged, but the cluster creation fails.
Which log should the consultant review to determine the cause?
- A. first_boot.log
- B. genesis.out
- C. foundation.out
- D. service.log
Answer: D
NEW QUESTION 36
A consultant deploys a four-node VMware ESXi cluster and vCenter server. An HA/DRS cluster is configured for all four nodes. The customer deploys five new VMs on the cluster.
During the knowledge Transfer, a network cable on one node is removed to demonstrate HA and migration of the VMs to another host. In the HA/DRS cluster settings, the VM Restart Priority for all CVMs is set to Disabled. The customer observes warnings that the CVM on the ejected host is no longer powered on.
Which ESXi HA/DRS cluster setting is missing?
- A. Enable EVC for the cluster.
- B. Disable Automation Level on all CVMs.
- C. Disable VM Monitoring on all CVMs.
- D. Enable Host Monitoring.
Answer: B
NEW QUESTION 37
......
Penetration testers simulate NCSC-Level-1 exam: https://www.itpassleader.com/Nutanix/NCSC-Level-1-dumps-pass-exam.html