NACE-CIP1-001 exam questions for practice in 2024 Updated 100 Questions
Updated Apr-2024 Premium NACE-CIP1-001 Exam Engine pdf - Download Free Updated 100 Questions
NEW QUESTION # 27
Inspection documentation is important because:
- A. Owners use the documentation for a variety of purposes
- B. a) & b)
- C. It is the only deliverable item provided by the inspector
- D. a) only
Answer: A
NEW QUESTION # 28
The NACE Inspector should perform tests for soluble salts:
- A. When specified
- B. Prior to surface preparation
- C. After surface preparation
- D. Prior to coating application
Answer: A
NEW QUESTION # 29
ISO ST 3 is described as:
- A. Very Thorough hand or power tool cleaning
- B. Thorough blast cleaning
- C. Very Thorough power tool cleaning
- D. Thorough hand tool cleaning
Answer: A
NEW QUESTION # 30
SSPC SP 1 identifies the use of:
- A. Biodegradable detergents
- B. Organic solvents
- C. A wide variety of materials
- D. Inorganic solvents
Answer: C
NEW QUESTION # 31
It is good practice for the NACE Inspector to have instrument calibration certificates available:
- A. In the field only
- B. At all times
- C. Only if the specification requires it
- D. In the office only
Answer: B
NEW QUESTION # 32
Digital hygrometers
- A. consist of a bimetallic sensing element protected from wind gusts.
- B. use a thermocouple in contact with the surface to measure temperature
- C. are used to measure temperature from a distance.
- D. determine relative humidity, air temperature, and dew point temperature:
Answer: D
NEW QUESTION # 33
On a blast-cleaned surface, Ian ultraviolet light is generally used to detect
- A. soluble chemical salts
- B. grease and oil
- C. inhibitor residues
- D. sulfates
Answer: B
NEW QUESTION # 34
The most important factor resulting in improved job site safety is:
- A. Situational Awareness
- B. Engineering Controls
- C. Personal Protective Equipment
- D. Safety Enforcement
Answer: A
NEW QUESTION # 35
Prior to the pre-job conference you notice that the Inspection and Test Plan does not require a hold point after surface preparation and coating application. In speaking with the owners' representative in advance of the meeting you sense he/she does not understand the importance of the hold point.
As a NACE CIP Level 1 Inspector your preferred course of action is to:
- A. Bring the matter up at the pre-job conference
- B. Gather data and attempt to meet with the owner's representative in advance of the pre-job conference
- C. Default to the owner's Inspection and Test Plan
- D. Meet separately with the coating manufactures' representative and coating application company in advance of the pre-job conference
Answer: A
NEW QUESTION # 36
If the specifier does not identify a restriction level in accordance with SSPC PA 2, the default restriction level is:
- A. Level 4
- B. Level 3
- C. Level 2
- D. Level 1
Answer: B
NEW QUESTION # 37
You have just received your NACE CIP Level 1 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:
- A. Accept the assignment without hesitation
- B. Advise the prospective employer that you cannot accept the position
- C. Review the NACE Attestation prior to making a decision
- D. Meet with the prospective employer to determine the scope of your role
Answer: D
NEW QUESTION # 38
Fine cracks in the surface of a coating that rarely reach the substrate are called
- A. blistering.
- B. checking.
- C. cracking.
- D. alligatoring.
Answer: B
NEW QUESTION # 39
Conventional spray is a good choice when:
- A. High quality finishes are required
- B. High production rates are required
- C. High transfer efficiency is required
- D. High viscosity coatings are being applied
Answer: A
NEW QUESTION # 40
When applying Thermal Spray Coatings the specification is most likely to refence:
- A. SSPC PA 2
- B. SSPC-CS 23.00/AWS C2.23/NACE No. 12
- C. NACE SP 0178
- D. NACE SP 0188
Answer: B
NEW QUESTION # 41
Whenever dissimilar metals must join, the most common practice is to
- A. provide cathodic protection to prevent corrosion,
- B. provide anodic protection to prevent corrosion.
- C. coat all connected dissimilar metals.
- D. avoid coating all connected dissimilar metals.
Answer: C
NEW QUESTION # 42
Which is a component that supplies most of the features and functions of the material?
- A. additive
- B. pigment
- C. solvent
- D. binder
Answer: D
NEW QUESTION # 43
......
Authentic NACE-CIP1-001 Dumps With 100% Passing Rate Practice Tests Dumps: https://www.itpassleader.com/NACE/NACE-CIP1-001-dumps-pass-exam.html
NACE NACE-CIP1-001 Real Exam Questions Guaranteed Updated Dump from ITPassLeader: https://drive.google.com/open?id=1NQiA1gwjJ5ed_z7gOOocrT2MiHxnPxeD