Pass EX200 Brain Dump Updated Certification Sample Questions
Online EX200 Test Brain Dump Question and Test Engine
NEW QUESTION # 19
You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer:
Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab:
Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
NEW QUESTION # 20
Configure your Host Name, IP Address, Gateway and DNS.
Host name: station.domain40.example.com
/etc/sysconfig/network
hostname=abc.com
hostname abc.com
IP Address:172.24.40.40/24
Gateway172.24.40.1
DNS:172.24.40.1
Answer:
Explanation:
see explanation below.
Explanation
# cd /etc/syscofig/network-scripts/
# ls
# vim ifcfg-eth0 (Configure IP Address, Gateway and DNS) IPADDR=172.24.40.40 GATEWAY=172.24.40.1 DNS1=172.24.40.1
# vim /etc/sysconfig/network
(Configure Host Name)
HOSTNAME= station.domain40.example.com
OR
Graphical Interfaces:
System->Preference->Network Connections (Configure IP Address, Gateway and DNS) Vim
/etc/sysconfig/network
(Configure Host Name)
NEW QUESTION # 21
One Logical Volume named /dev/test0/testvolume1 is created. The initial Size of that disk is 100MB now you required more 200MB. Increase the size of Logical Volume, size should be increase on online.
Answer:
Explanation:
see explanation below.
Explanation
* lvextend -L+200M /dev/test0/testvolume1 Use lvdisplay /dev/test0/testvolume1)
* ext2online -d /dev/test0/testvolume1
lvextend command is used the increase the size of Logical Volume. Other command lvresize command also here to resize. And to bring increased size on online we use the ext2online command.
NEW QUESTION # 22
Which of the following commands lists the cookbooks available on a Chef server?
- A. chef-solo cookbook list
- B. chef-server cookbook list
- C. chef-client cookbook list
- D. kitchen cookbook list
- E. knife cookbook list
Answer: B
NEW QUESTION # 23
Create a logical volume
Create a new logical volume as required:
Name the logical volume as database, belongs to datastore of the volume group, size is 50 PE.
Expansion size of each volume in volume group datastore is 16MB.
Use ext3 to format this new logical volume, this logical volume should automatically mount to /mnt/database
Answer:
Explanation:
fdisk -cu /dev/vda// Create a 1G partition, modified when needed
partx -a /dev/vda
pvcreate /dev/vdax
vgcreate datastore /dev/vdax -s 16M
lvcreate- l 50 -n database datastore
mkfs.ext3 /dev/datastore/database
mkdir /mnt/database
mount /dev/datastore/database /mnt/database/ df -Th
vi /etc/fstab
/dev/datastore /database /mnt/database/ ext3 defaults 0 0 mount -a
Restart and check all the questions requirements.
NEW QUESTION # 24
There is a local logical volumes in your system, named with common and belong to VGSRV volume group, mount to the /common directory. The definition of size is 128 MB.
Requirement:
Extend the logical volume to 190 MB without any loss of data. The size is allowed between 160-160 MB after extending.
Answer:
Explanation:
see explanation below.
Explanation
lvextend -L 190M /dev/mapper/vgsrv-common resize2fs /dev/mapper/vgsrv-common
NEW QUESTION # 25
According the following requirements to create a local directory /common/admin.
This directory has admin group.
This directory has read, write and execute permissions for all admin group members.
Other groups and users don't have any permissions.
All the documents or directories created in the/common/admin are automatically inherit the admin group.
Answer:
Explanation:
mkdir -p /common/admin
chgrp admin /common/admin
chmod 2770 /common/admin
NEW QUESTION # 26
Add users: user2, user3.
The Additional group of the two users: user2, user3 is the admin group Password: redhat
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# useradd -G admin user2
# useradd -G admin user3
# passwd user2
redhat
# passwd user3
redhat
NEW QUESTION # 27
Create User Account.
Create the following user, group and group membership:
Adminuser group
User natasha, using adminuser as a sub group
User Harry, also using adminuser as a sub group
User sarah, can not access the SHELL which is interactive in the system, and is not a member of adminuser, natasha,harry,sarah password is redhat.
Answer:
Explanation:
groupadd adminuser
useradd natasha -G adminuser
useradd haryy -G adminuser
useradd sarah -s /sbin/nologin
Passwd user name // to modify password or echo redhat | passwd --stdin user name id natasha // to view user group.
NEW QUESTION # 28
You are a System administrator. Using Log files very easy to monitor the system. Now there are 50 servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs from all servers into on LOG Server. How will you configure the LOG Server to accept logs from remote host?
Answer:
Explanation:
By default, system accept the logs only generated from local host. To accept the Log from other host configure:
vi /etc/sysconfig/syslog SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages received with -r
service syslog restart
NEW QUESTION # 29
Configure the verification mode of your host account and the password as LDAP. And it can ldapuser40.
The password is set as "password". And the certificate login successfully through can be downloaded from http://ip/dir/ldap.crt. After the user logs on , the user has no host directory unless you configure the autofs in the following questions.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
system-config-authentication
LDAP Server: ldap//instructor.example.com (In domain form, not write IP) OR
# yum groupinstall directory-client (1.krb5-workstation 2.pam-krb5 3.sssd)
# system-config-authentication
1.User Account Database: LDAP
2.LDAP Search Base DN: dc=example,dc=com
3.LDAP Server: ldap://instructor.example.com (In domain form, not write IP) 4.Download CA Certificate
5.Authentication Method: LDAP password
6.Apply
getent passwd ldapuser40
NEW QUESTION # 30
Configure a cron Task.
User natasha must configure a cron job, local time 14:23 runs and executes: */bin/echo hiya every day.
Answer:
Explanation:
see explanation below.
Explanation
crontab -e -u natasha
23 14/bin/echo hiya
crontab -l -u natasha // view
systemctlenable crond
systemcdlrestart crond
NEW QUESTION # 31
Which of the following sections must exist in a Packer template?
- A. provisioners
- B. post-processsors
- C. builders
- D. variables
- E. images
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION # 32
Part 1 (on Node1 Server)
Task 6 [Accessing Linux File Systems]
Find all lines in the file /usr/share/mime/packages/freedesktop.org.xml that contain the string ich.
Put a copy of these lines in the original order in the file /root/lines.
/root/lines should contain no empty lines and all lines must be exact copies of the original lines in
/usr/share/mime/packages/freedesktop.org.xml
Answer:
Explanation:
* [root@node1 ~]# cat /usr/share/mime/packages/freedesktop.org.xml | grep ich > /root/lines
[root@node1 ~]# cat /root/lines
<comment xml:lang="ast">Ficheru codificau en BinHex de Machintosh</comment>
<comment xml:lang="fr">fichier code Macintosh BinHex</comment>
<comment xml:lang="gl">ficheiro de Macintosh codificado con BinHex</comment>
<comment xml:lang="oc">fichier encodat Macintosh BinHex</comment>
<comment xml:lang="pt">ficheiro codificado em BinHex de Macintosh</comment>
<comment xml:lang="fr">fichier boite aux lettres</comment>
NEW QUESTION # 33
Configure a HTTP server, which can be accessed through http://station.domain40.example.com.
Please download the released page from http://ip/dir/example.html.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# yum install -y httpd
# chkconfig httpd on
# cd /var/www/html
# wget http://ip/dir/example.html
# cp example.com index.html
# vim /etc/httpd/conf/httpd.conf
NameVirtualHost 192.168.0.254:80
<VirtualHost 192.168.0.254:80>
DocumentRoot /var/www/html/
ServerName station.domain40.example.com
</VirtualHost>
NEW QUESTION # 34
Make on data that only the user owner and group owner member can fully access.
Answer:
Explanation:
see explanation below.
Explanation
* chmod 770 /data
* Verify using : ls -ld /data Preview should be like:
drwxrwx--- 2 root sysadmin 4096 Mar 16 18:08 /data
To change the permission on directory we use the chmod command.
According to the question that only the owner user (root) and group member (sysadmin) can fully access the directory so: chmod 770 /data
NEW QUESTION # 35
Configure the NTP service in your system.
Answer:
Explanation:
system-config-date &
NEW QUESTION # 36
CORRECT TEXT
Find the files owned by harry, and copy it to catalog: /opt/dir
Answer:
Explanation:
# cd /opt/
# mkdir dir
# find / -user harry -exec cp -rfp {} /opt/dir/ \;
NEW QUESTION # 37
CORRECT TEXT
Upgrading the kernel as 2.6.36.7.1, and configure the system to Start the default kernel, keep the old kernel available.
Answer:
Explanation:
# cat /etc/grub.conf
# cd /boot
# lftp it
# get dr/dom/kernel-xxxx.rpm
# rpm -ivh kernel-xxxx.rpm
# vim /etc/grub.conf
default=0
NEW QUESTION # 38
CORRECT TEXT
Copy /etc/fstab to /var/tmp name admin, the user1 could read, write and modify it, while user2 without any permission.
Answer:
Explanation:
# cp /etc/fstab /var/tmp/
# chgrp admin /var/tmp/fstab
# setfacl -m u:user1:rwx /var/tmp/fstab
# setfacl -m u:user2:--- /var/tmp/fstab
# ls -l
-rw-rw-r--+ 1 root admin 685 Nov 10 15:29 /var/tmp/fstab
NEW QUESTION # 39
......
The Red Hat Certified System Administrator (RHCSA) exam is a certification exam designed to test the skills and knowledge of system administrators who are responsible for managing Red Hat Enterprise Linux systems. EX200 exam is designed to validate the candidate's ability to perform essential system administration tasks, such as configuring network interfaces, managing storage, and securing the system.
Real RedHat EX200 Exam Dumps with Correct 136 Questions and Answers: https://www.itpassleader.com/RedHat/EX200-dumps-pass-exam.html
RedHat EX200 Certification Real 2024 Mock Exam: https://drive.google.com/open?id=1pI0lVPKZOxI0GKtj_qgbBkdoFdb8tbge