300-615 Braindumps PDF, Cisco 300-615 Exam Cram
New 2022 300-615 Sample Questions Reliable 300-615 Test Engine
Ways to Weave Success in the Cisco 300-615 Exam
To gain in-depth mastery over all the mentioned exam topics, one must take the help of dependable study resources. Troubleshooting Cisco Data Center Infrastructure (DCIT) v7.0, offered by the vendor, is the most dependable training course as it polishes the test-taker at a conjectural and practical level.
The preparation content you gain after purchasing the course can be accessed for 180 days. It includes information for self-paced studies, video tutorials, and labs. Taking-up this program also allows you to earn 50 continuing education credits. The lab sessions blended with lectures ensure the most complete understanding of what awaits you in the test. This kind of learning is extensive and result-oriented.
When it comes to content, training throws light on concepts like VLANs and private VLANs, troubleshooting of routing protocols, handling port channels’ problems, Overlay Transport Virtualization (OTV), and Virtual Extensible LAN.
Professionals like data center engineers, consulting systems engineers, technical solutions architects, and server administrators can enroll in this course and hone their skills a little bit further.
In addition, note that self–study is an important aspect of exam preparation. For this purpose, books like “How I Passed Troubleshooting Cisco Data Center Infrastructure (300-615 DCIT) Exam” (Rocismo Liolentz Publications) will be beneficial. This material is valuable as it helps to learn some viable tips and tricks that will help you successfully pass the test.
NEW QUESTION 50
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?
- A. Install Server Firmware, then Install Infrastructure Firmware
- B. Install infrastructure Firmware, then Install Hypervisor Firmware.
- C. Install Hypervisor Firmware, then Install Infrastructure Firmware
- D. Install Infrastructure Firmware, then Install Server Firmware.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Ma
NEW QUESTION 51
An engineer is troubleshooting a fabric discovery failure. Which two requirements must an engineer verify about switch connectivity to solve the problem? (Choose two.)
- A. Leaf nodes must connect to spine nodes only.
- B. A Cisco APIC must be attached to leaf nodes.
- C. Spine nodes must connect to other spine nodes.
- D. A Cisco APIC must be attached to a spine node only.
- E. A Cisco APIC must be dual-attached to two separate spine nodes.
Answer: A,B
Explanation:
Section: Network
NEW QUESTION 52
Refer to the exhibit.
The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?
- A. IP address of the SNMP server
- B. event statement
- C. policy-default action statement
- D. event-default action statement
Answer: A
NEW QUESTION 53
Refer to the exhibit.
An OSPF adjacency between Router-A and Router-B cannot reach the FULL state. Which action resolves the issue?
- A. Adjust the MTU on Router-A to 1600.
- B. Disable the check of the MTU value.
- C. Adjust the MTU on Router-B to 1604.
- D. Set the OSPF media type to point-to-point.
Answer: B
NEW QUESTION 54
An engineer must replace a failed memory on a Cisco UCS B-Series Blade Server. After the replacement was done, the server has a "resolve slot" warning. Which server maintenance action resolves the issue?
- A. Perform diagnostic interrupt on the server.
- B. Re-acknowlegement the server.
- C. Reset the server.
- D. Decomission the server.
Answer: B
NEW QUESTION 55
An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?
- A. Restore UCSM configuration from backup.
- B. From the peer IOM, reset the faulty module.
- C. Use AutoInstall to reinstall the firmware.
- D. Roll back to the previous firmware.
Answer: D
Explanation:
Section: Management and Operations
NEW QUESTION 56
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION 57
After upgrading a client's fabric interconnect to the latest version, an engineer discovers that the appliance has lost its entire configuration. Which two locations should an engineer check to confirm that the appliance had backed up the configuration prior to the upgrade in order to retrieve the lost configuration? (Choose two.)
- A. Equipment FSM page, InternalBackup stage
- B. Service profiles page, InternalBackup stage
- C. Admin page, PollInternalBackup stage
- D. Admin page, InternalBackup stage.
- E. Equipment FSM page, PollInternalBackup stage
Answer: A,C
NEW QUESTION 58
Refer to an exhibit.
An engineer is troubleshooting an upgrade failure on a switch. Which action resolves the issue?
- A. Reload the same system image.
- B. Use the same system image as the kickstart image.
- C. Save the system image in NVRAM.
- D. Load a new system image.
Answer: D
NEW QUESTION 59
A system administrator connects a Cisco Nexus 2248PQ FEX to a fabric interconnect to expand the ports that are available for connecting Cisco UCS C-Series Rack Servers. In Cisco UCS Manager, the administrator does not see the servers connected to this FEX. Which action should be taken to resolve the issue?
- A. The ports that connect the FEX to the fabric interconnects must be configured as server ports
- B. The fabric interconnects must be rebooted before the FEX is recognized
- C. The transceivers must be exchanged to support the connectivity between the FEX and the fabric interconnects
- D. The FEX must be exchanged so that it supports the connectivity between fabric interconnects and UCS CSeries servers
Answer: A
NEW QUESTION 60
Refer to an exhibit.
An engineer is troubleshooting an upgrade failure on a switch. Which action resolves the issue?
- A. Reload the same system image.
- B. Use the same system image as the kickstart image.
- C. Save the system image in NVRAM.
- D. Load a new system image.
Answer: D
NEW QUESTION 61
Refer to the exhibit.
An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?
- A. "out-of-service" indicates that no service graph is in use for this interface.
- B. The interface policy is misconfigured.
- C. The interface is working correctly and fully operational, but it is not in use.
- D. "out-of-service" is the default interface status in ACI.
Answer: B
NEW QUESTION 62
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 63 
Refer to the exhibit. The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
- A. event statement
- B. configure terminal action
- C. event-default action statement
- D. environment variable
Answer: A
Explanation:
Section: Automation
NEW QUESTION 64
A mission-critical server is connected to site A. Connectivity to this server is lost from site B because the MAC route is missing in the OTV VDC of the Nexus 7000 in site B due to MAC aging. Which action allows the flooding of the unknown unicast MAC on the Nexus 7000 in the OTV VDC?
- A. Use route-map to advertise this MAC statically and redistribute with ISIS.
- B. Use the otv flood mac <> command to selectively flood traffic for a given MAC.
- C. Use the otv isis bfd <> command to configure BFD protocol.
- D. Unknown unicast flooding is not allowed.
Answer: B
NEW QUESTION 65
Refer to the exhibit.
Sw1 and Sw2 are two Cisco Nexus 9000 Series Switches that run Cisco NX-OS. They are VTEPs in the same vPC domain. Which statement describes what happens in this scenario?
- A. Sw1 performs the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs.
- B. Sw1 and switch 2 perform the VxLAN multicast encapsulation and decapsulation for all traffic associated with the VxLAN VNIs, depending on the hashing.
- C. Sw1 drops all traffic because there is no (S, G) OIF list to encapsulate VXLAN multicast packets and send them out to the underlay network through the uplink interfaces.
- D. Sw2 did not send an IP PIM register to the rendezvous point for the multicast group of the VXLAN VNI.
Answer: A
NEW QUESTION 66 
Refer to the exhibit. The HSRP instance on both switches is showing as active. Which action resolves the issue?
- A. Configure the HSRP timers to be the same.
- B. Configure the IP address of N9K-B on the same subnet as N9K-A.
- C. Configure preempt on only one of the switches.
- D. Allow VLAN 100 between the switches.
Answer: D
Explanation:
Section: Network
Explanation
NEW QUESTION 67
Refer to the exhibit.
When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?
- A. Port 15 is missing a license.
- B. The polarity of the fiber cable is reversed.
- C. Port 15 is configured as an Ethernet port.
- D. Port 15 is configured for 4-Gb FC.
Answer: D
NEW QUESTION 68
Refer to the exhibit.
The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?
- A. IP address of the SNMP server
- B. event statement
- C. policy-default action statement
- D. event-default action statement
Answer: A
NEW QUESTION 69
Refer to the exhibit.
An engineer is configuring boot from iSCSI on a Cisco UCS B-Series Blade Server, but the LUN fails to mount. Which action resolves the issue?
- A. Set a connection timeout value of 250 in the iSCSI Adapter Policy.
- B. Statically configure the target information in the Boot Policy.
- C. Configure a QoS policy on the vNIC.
- D. Configure an MTU size of 9000 on the appliance port.
Answer: B
NEW QUESTION 70
An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?
- A. Restore UCSM configuration from backup.
- B. From the peer IOM, reset the faulty module.
- C. Use AutoInstall to reinstall the firmware.
- D. Roll back to the previous firmware.
Answer: D
Explanation:
Section: Management and Operations
Explanation/Reference:
NEW QUESTION 71
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?
- A. Install Server Firmware, then Install Infrastructure Firmware
- B. Install infrastructure Firmware, then Install Hypervisor Firmware.
- C. Install Hypervisor Firmware, then Install Infrastructure Firmware
- D. Install Infrastructure Firmware, then Install Server Firmware.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Ma
NEW QUESTION 72
A network administrator attempts to install an application in the Cisco NX-OS Guest shell and receives an error that there is not enough space on the disk. Which command must the administrator run to increase the disk space available in the Guest shell?
- A. guestshell growdisk rootfs [size-in-MB]
- B. guestshell resize2fs rootfs [size-in-MB]
- C. guestshell pvextend rootfs [size-in-MB]
- D. guestshell resize rootfs [size-in-MB]
Answer: D
Explanation:
Section: Automation
NEW QUESTION 73
An engineer removes a VMM domain from an endpoint group called EPG-1, but the distributed port group fails to be deleted. Which action must be taken to resolve the issue?
- A. Remove the remaining EPGs from the VMM domain.
- B. Migrate all virtual machines in the EPG-1 to different port groups.
- C. Migrate all virtual machines in the EPG-1 to different hypervisors.
- D. Remove the port group manually.
Answer: A
NEW QUESTION 74
......
Feel Cisco 300-615 Dumps PDF Will likely be The best Option: https://www.itpassleader.com/Cisco/300-615-dumps-pass-exam.html
300-615 exam torrent Cisco study guide: https://drive.google.com/open?id=1SNMr5WufZZjvOw7vTeHA0tLQAZDw1dx3