Get Cisco 300-615 Dumps Questions [2022] To Gain Brilliant Result
300-615 dumps - ITPassLeader - 100% Passing Guarantee
Who should take the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam
The 300-615 exam test certification is an internationally-recognized validation that identifies persons who earn it as possessing skilled in Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure i.e. Cisco routing and switching infrastructure devices like router, switches, etc. If a candidate/professional seeks a powerful improvement in career growth needs enhanced knowledge, skills, and talents. The Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam certification provides proof of this advanced knowledge and skill. If a candidate knows associated technologies and skills that are required to pass Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam then he should take this exam. These are candidates who should look for Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure
- Support engineers
- Cisco field support technicians
Obligatory Prerequisites
Though Cisco 300-615 is associated with the professional stage, there are no mandatory prerequisites to be met for becoming eligible. It is open for all. However, it won’t hurt if the test-taker has already explored the data center industry and has gained hands-on experience of about three to five years in generating these solutions.
Career Opportunities
Passing the Cisco 300-615 exam on the first try will help you get the specialist- and professional-level certificates as well as demonstrate to the current or future employer that you are a specialist in the data center solutions field and worthy of the desired position. Thus, the roles that you can choose from include a Data Center Engineering Telecom Manager, a Data Center Systems Administrator, an Infrastructure Manager, a Data Center Technician, and a Data Center VMware Engineer. If you are thinking about what income to expect, you can imagine a range of $39,000-145,000 per year, depending on your title.
NEW QUESTION 18
A client reports that many flaps and server cluster disconnects are occurring in its data center. While troubleshooting the issue, an engineer discovers that a network attack is hitting the Cisco Nexus 7000 Series Switches and that the source IP addresses are spoofed. Which first-line security solution resolves this issue?
- A. IP Source Guard
- B. Storm Control
- C. Unicast RPF
- D. Dynamic ARP Inspection
Answer: D
Explanation:
Section: Management and Operations
NEW QUESTION 19
Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 20
Refer to the exhibit. A network engineer creates an EEM script to trigger an SNMP notification when a user enters configuration mode, but the trap is not received when the condition is met. Which action resolves the issue?
- A. Append action 2.0 event-default to the script
- B. Modify snmp-trap strdata "Configuration changed" to syslog msg Configuration changed
- C. Append action 2.0 cli "conf t" to the script
- D. Modify cli match "conf t" to "snmp match "conf t"
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide/sm_12eem.html
NEW QUESTION 21
Refer to the exhibit.
After a failover occurs, which two actions must be performed on Switch-B to manually preempt the operational primary role back to Switch-A? (Choose two.)
- A. Configure the local vPC role priority to have the same value as Switch-A.
- B. Disable and then re-enable the vPC peer link.
- C. Configure the local vPC role priority to have a lower value than Switch-A.
- D. Disable and then re-enable the vPC peer-keepalive link.
- E. Configure the local vPC role priority to have a higher value than Switch-A.
Answer: B,E
NEW QUESTION 22
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 23
Refer to the exhibit. A network engineer configures an authentication domain through an LDAP provider on the Cisco UCS Manager for users from different companies to log into their respective organizations created in the UCS Manager. The engineer tests the configuration and notices that any user has login access to any organization in the UCS Manager. Which action should be taken to resolve the issue?
- A. Configure the Filter field with the company
- B. Configure the Filter field with sAMAccountName=$company
- C. Configure the Attribute field with sAMAccountName=$company
- D. Configure the Attribute field with the company
Answer: B
NEW QUESTION 24
An engineer must replace a failed memory on a Cisco UCS B-Series Blade Server. After the replacement was done, the server has a "resolve slot" warning. Which server maintenance action resolves the issue?
- A. Perform diagnostic interrupt on the server.
- B. Re-acknowlegement the server.
- C. Reset the server.
- D. Decomission the server.
Answer: B
NEW QUESTION 25
Refer to the exhibit.
Cisco UCS Manager is being upgraded using the Auto Install feature, but the FSM fails. Which action resolves the issue?
- A. Acknowledge the primary fabric interconnect.
- B. Remove the service pack from the subordinate fabric interconnect.
- C. Clear the startup version of the default infrastructure pack.
- D. Upgrade the firmware of the infrastructure firmware by using the force option.
Answer: C
NEW QUESTION 26
An engineer is troubleshooting a packet flow from an access leaf to spine. Which EVPN routes are expected on this connection?
- A. EVPN Type 0,16
- B. EVPN Type 0,9,15
- C. EVPN Type 9-15
- D. EVPN Type 1-5
Answer: D
Explanation:
Section: Network
Explanation
NEW QUESTION 27
You have an ACI environment with three APICs, two spine switches, and four-leaf switches. You wipe and reboot all APICs first then leaf and spine switches one-by-one and successfully go through the Initial Setuo dialogue on the APIC 1 CIMC KVM console. When you log in to the APIC1 WebGUI, you notice that you do not see any directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership.
What is the cause of the issue?
- A. The same Fabric Name value should be used before after wiping all devices.
- B. The leaf nodes were not erased properly, which caused a fabric parameters mismatch with the APIC1.
- C. You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
- D. Rebooting the APICs and the leaf and spine switches after wiping them is not required.
Answer: C
Explanation:
Section: Compute Platforms
NEW QUESTION 28
An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?
- A. Restore UCSM configuration from backup.
- B. From the peer IOM, reset the faulty module.
- C. Use AutoInstall to reinstall the firmware.
- D. Roll back to the previous firmware.
Answer: D
Explanation:
Section: Management and Operations
NEW QUESTION 29
An engineer discovers that an NPV/NPIV uplink experiences a heavy load and plans to add more uplinks.
What occurs when the new uplinks are added to the uplink?
- A. Paths must be defined before new connections use the new uplinks.
- B. Only new connections automatically use the new uplinks.
- C. New and existing connections automatically use the new uplinks.
- D. All connections must be reset before the new uplinks are used.
Answer: C
Explanation:
Section: Storage Network
NEW QUESTION 30
Refer to the exhibit.
HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to solve the problem?
- A. Configure the same HSRP priority between the two switches.
- B. Configure preempt on one of the switches in the HSRP group.
- C. Configure HSRP version 2 on Nexus7K-2.
- D. Configure the correct subnet mask on Nexus7K-1.
Answer: C
NEW QUESTION 31
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 32
An engineer troubleshoots a custom AV pair that a client created on an external authentication server to map a read-only role for a specific security domain. Which AV pair solves the problem?
- A. shell=Security_Domain_1/Read_Role_1|Read_Role_2
- B. shell:domains=Security_Domain_1/Read_Role_1|Read_Role_2
- C. shell:domains=Security_Domain_1//Read_Role_1|Read_Role_2
- D. shell:domains=Security_Domain_1/Write_Role_1|Read_Role_2
Answer: C
Explanation:
Section: Management and Operations
NEW QUESTION 33
An engineer troubleshoots a packet flow from an access leaf to a spine. Which EVPN routes are expected on this connection?
- A. EVPN Type 9-15
- B. EVPN Type 0, 9, and 15
- C. EVPN Type 0 and 16
- D. EVPN Type 1-5
Answer: D
Explanation:
Section: Network
Explanation
NEW QUESTION 34
An engineer must place a Cisco UCS B-Series Server in a single server pool in Cisco UCS Manager. The engineer creates a qualification policy, but the server is still seen in multiple pools. Which two actions resolve the issue? (Choose two.)
- A. Set the number of vNICs qualifier inside the Server Pool Policy.
- B. Select the Server Pool Policy Qualification from the qualification drop-down menu in the Server Pool Policy
- C. Select the Server Pool Policy from the qualification drop-down menu in the Server Pool Policy Qualification
- D. Set the operating system qualifier inside the Server Pool Policy Qualification
- E. Set the storage capacity qualifier inside the Server Poo. Policy Qualification.
Answer: B,E
NEW QUESTION 35 
Refer to the exhibit. The HSRP instance on both switches is showing as active. Which action resolves the issue?
- A. Configure the HSRP timers to be the same.
- B. Configure the IP address of N9K-B on the same subnet as N9K-A.
- C. Configure preempt on only one of the switches.
- D. Allow VLAN 100 between the switches.
Answer: D
Explanation:
Section: Network
Explanation
NEW QUESTION 36
One of Cisco Nexus Series interfaces has become errdisabled with the error message "DCX-No ACK in
100 PDUs". What is the cause of this error?
- A. LLDP is disabled on the switch.
- B. The host has not responded to the Control Sub-TLV DCBX exchanges of the switch.
- C. The acknowledgement number in the server response has not incremented for 100 exchanges.
- D. Cisco Discovery Protocol is disabled on the switch.
Answer: C
Explanation:
Section: Storage Network
NEW QUESTION 37
Refer to the exhibit.
The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration set must be added to the script to fix the issue?
- A. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- B. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- C. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
- D. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution
Answer: C
Explanation:
Need exact snap shot to confirm the following.
The selection of is due to
SNMP command has the key word "oid".
The command "switchto vdc Core" show run in "enable" mode, not "config t" mode.
NEW QUESTION 38
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION 39
A fabric interconnect fails to start, and the console displays the loader prompt. Which two actions resolve the issue? (Choose two.)
- A. Load an uncorrupt bootloader image.
- B. Load the correct version of the boot image.
- C. Load an uncorrupt kickstart image.
- D. Reformat the fabric interconnect.
- E. Reconnect Layer 1 and Layer 2 cables between the FIs.
Answer: B,C
Explanation:
Section: Storage Network
NEW QUESTION 40
......
Get 100% Passing Success With True 300-615 Exam: https://www.itpassleader.com/Cisco/300-615-dumps-pass-exam.html
Premium Quality Cisco 300-615 Online dumps: https://drive.google.com/open?id=1SNMr5WufZZjvOw7vTeHA0tLQAZDw1dx3